New Models

[Dawizman]

I would be interested in one or two of the IDC.

[sirhc]

I would be interested in one or two of the IDC.

You can purchase them on the site but I would suggest you get ONE and make sure it works for you

[sirhc]

We are releasing a limited number of the new WS-26 models which are now available on the web store in limited numbers.
You will see models sell out then come back in stock off and on as we get more and more parts in to assemble more units.

NOTE:
Rack mount ears sold separately
Offers (2) ports capable of 24VH for radios like Ignite MetroLink
Offers (6) ports capable of 48VH for radios like AirFIBER 5/24

We ask that these be purchased by USA customers only and no Distributor sales yet.

Full production is in progress with release scheduled in about 4-6 weeks.

WS-26-DC
We will be releasing limited numbers throughout the month starting now
This model is like the WS-12-DC except more port.
It expects conditioned 48V DC plus or minus a couple volts (a power supply)

WS-26-400-AC - This model replaces the WS-24-400A
We will be releasing limited numbers throughout the month starting now
400 watts
MUCH smaller form factor than the WS-24-400A
More POE options than the WS-24-400A

WS-26-400-IDC - ISOLATED POWER SUPPLY
We will be releasing limited numbers throughout the month starting now
400 watts
This model IS designed for NEGATIVE 48V DC sites - but will also work with POSITIVE 48V sites
Input voltage range 36V-72V
Does not monitor DC input voltage like the SMART DC units such as WS-12-250-DC and WS-26-500-DC

WS-26-500-DC
We will be releasing limited numbers throughout the month starting in a couple weeks
500 watts
This model is NOT designed for NEGATIVE 48V DC sites
Input voltage range 9V-72V
This model is like the WS-12-250-DC except more ports with more VH ports and 500 watts

Also RF Armor now has Ethernet Cable and Ends for sale - $$SAVE MONEY$$
Click here to goto RF Armor site: https://www.rfarmor.com/cable-connectors.html

[plankanater]

would also love to see 10g but understand that there has to be a market for it. We would definitely buy the 10gig switches even with the increased cost. Even on the 14 port models. That way we can use the airfiber products and uplink them on a single port to a mikrotik then feed the tower.
However, I do understand there has to be a market before you will invest the money.

[sirhc]

I had released like 100 more WS-26-400-AC and a few WS-26-500-DC the other day (still waiting on parts for big release) and whereas most were sold I was surprised all did not sell out yet?

https://www.netonix.com/wisp-switch/ws-26-400-ac.html

https://www.netonix.com/wisp-switch/ws-26-500-dc.html

Grab them while you can.