Hi,
We're experiencing an issue with a deployment of Netonix WISP Switches in a ring network at a client site. Basically, the switches are all connected via UBNT AirFiber radios as the primary link, with fiber as a backup using RSTP (don't ask why it's not the other way around, it's just what the client demanded). At any rate, in our redundancy and implementation testing, we can't get STP to activate the fiber ports when we simulate a wireless link outage. We tested failing from copper to copper, and that seems to work just fine, but not fiber.
Is this a known issue? Has anyone encountered it before? I've searched through the forums and haven't been able to find anything.
Thanks in advance!
Issue with STP between copper port and fiber SFP
- redfoxtech
- Member
- Posts: 3
- Joined: Mon May 15, 2017 8:32 pm
- Has thanked: 0 time
- Been thanked: 1 time
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Issue with STP between copper port and fiber SFP
No RSTP has been proven many times to work as it is supposed to in fact I use it at my WISP.
What version of firmware are you running?
Please provide a diagram of all equipment from switch to switch
Also post up RSTP Tabs of switches
Maybe you should play with this in your LAB before implementing it using 2 switches and 2 cables as RSTP works the same regardless of medium
We always LAB stuff before production especially if some new equipment we have not used before.
What version of firmware are you running?
Please provide a diagram of all equipment from switch to switch
Also post up RSTP Tabs of switches
Maybe you should play with this in your LAB before implementing it using 2 switches and 2 cables as RSTP works the same regardless of medium
We always LAB stuff before production especially if some new equipment we have not used before.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- redfoxtech
- Member
- Posts: 3
- Joined: Mon May 15, 2017 8:32 pm
- Has thanked: 0 time
- Been thanked: 1 time
Re: Issue with STP between copper port and fiber SFP
Thanks for the quick reply. I'll look further into the fiber setup. It's possible that there's an issue with the runs (the other issue we suspected), we're just approaching on multiple fronts. We're running firmware version 1.4.2, if that means anything. :)
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Issue with STP between copper port and fiber SFP
redfoxtech wrote:Thanks for the quick reply. I'll look further into the fiber setup. It's possible that there's an issue with the runs (the other issue we suspected), we're just approaching on multiple fronts. We're running firmware version 1.4.2, if that means anything. :)
UPDATE THE FIRMWARE THAT FIRMWARE IS 6+ MONTHS OLD AND HAS A LOT OF FIXED BUGS AND SECURITY PATCHES IN THE CURRENT VERSION v1.4.7
Please confirm you upgrade the firmware to v1.4.7 or v1.4.8rcX
Some of the things fixed are to do with SFP ports
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- redfoxtech
- Member
- Posts: 3
- Joined: Mon May 15, 2017 8:32 pm
- Has thanked: 0 time
- Been thanked: 1 time
Re: Issue with STP between copper port and fiber SFP
The switches were installed about 6 months ago so that makes sense. Will try the new update and see how it goes.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 42 guests