Correct it would not matter what the input voltage to the WS-6-MINI was between 32V and 57V the 24V would always be 24V as we regulate that voltage.
But whatever voltage you feed the switch it would pass out as the 48V POE option as it is a straight pass through and unregulated.
The important thing is when powering the WS-6-MINI with POE IN that you are using all 4 pair not just 2 pair else you will damage the switch.
Also important with the WS-6-MINI is the grounding, making sure that if using AC power to power what ever is powering the WS-6-MINI Earth Ground is bonded to the tower ground same as when using any switch else you will damage the switch.
WS-6-MINI Barrel connector
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-6-MINI Barrel connector
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- ArtLarsen
- Member
- Posts: 1
- Joined: Fri Sep 02, 2016 10:16 am
- Has thanked: 0 time
- Been thanked: 0 time
-
jpaine619 - Member
- Posts: 82
- Joined: Fri Jul 07, 2017 11:13 pm
- Location: San Diego, CA
- Has thanked: 26 times
- Been thanked: 18 times
Re: WS-6-MINI jack dimensions and polarity
sirhc wrote:I will add it to the Spec sheet
If you go to our web site the plug dimensions are there as the 3rd picture.
http://www.netonix.com/wisp-switch/ws-6-mini.html
I ended up here after downloading the spec sheet to find the answer to this exact question
and it is still not in the spec sheet after nearly 3 years.
-
jpaine619 - Member
- Posts: 82
- Joined: Fri Jul 07, 2017 11:13 pm
- Location: San Diego, CA
- Has thanked: 26 times
- Been thanked: 18 times
Re: WS-6-MINI Barrel connector
Is it 5.5mm X 2.5mm? The image is a little blurry
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-6-MINI Barrel connector
jpaine619 wrote:Is it 5.5mm X 2.5mm? The image is a little blurry
Did you look at the first post in this thread?
https://forum.netonix.com/viewtopic.php?f=17&t=722#p5340
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
jpaine619 - Member
- Posts: 82
- Joined: Fri Jul 07, 2017 11:13 pm
- Location: San Diego, CA
- Has thanked: 26 times
- Been thanked: 18 times
Re: WS-6-MINI Barrel connector
Yes. As I mentioned it's a little blurry. I did see in the second post.. But, why is it still not in the spec sheet? C'mon....
Who is online
Users browsing this forum: No registered users and 61 guests