I have just replaced it now with an ordinary unmanaged switch, if I still get problems tonight it is not your switch at fault.
If I do not get any problems tonight then it is your switch.
Data dropping under load, no DHCP
-
opalit - Member
- Posts: 25
- Joined: Sun Jul 19, 2015 11:28 am
- Location: North Wales, UK
- Has thanked: 0 time
- Been thanked: 0 time
-
lligetfa - Associate
- Posts: 1191
- Joined: Sun Aug 03, 2014 12:12 pm
- Location: Fort Frances Ont. Canada
- Has thanked: 307 times
- Been thanked: 381 times
Re: Data dropping under load, no DHCP
opalit wrote:If I do not get any problems tonight then it is your switch.
Possibly but IMHO that is overly simplistic reasoning. In my long networking career I have found that combinations of hardware can sometimes exacerbate issues in other places.
-
opalit - Member
- Posts: 25
- Joined: Sun Jul 19, 2015 11:28 am
- Location: North Wales, UK
- Has thanked: 0 time
- Been thanked: 0 time
Re: Data dropping under load, no DHCP
I am only using it as a basic POE switch nothing complicated, I have put the original adapters back and for the time being an unmanaged switch, no problems with the devices getting DHCP addresses.
Customers will soon let me know tonight if there is still a problem on the network.
Customers will soon let me know tonight if there is still a problem on the network.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Data dropping under load, no DHCP
opalit wrote:I am only using it as a basic POE switch nothing complicated, I have put the original adapters back and for the time being an unmanaged switch, no problems with the devices getting DHCP addresses.
Customers will soon let me know tonight if there is still a problem on the network.
Well the DHCP issue is fixed with v1.3.0rcX, I have asked Eric to backport the fix to 1.2.X but like any programmer he wants to EOL v1.2.x and move to v1.3.X but I have not had enough time to work on testing it enough to call it stable however all the DC switches we are shipping out will only work with v1.3.X so....
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
opalit - Member
- Posts: 25
- Joined: Sun Jul 19, 2015 11:28 am
- Location: North Wales, UK
- Has thanked: 0 time
- Been thanked: 0 time
Re: Data dropping under load, no DHCP
Well I do not know what to say we have had a glitch free night after replacing the WS-12-250A with the Ubiquiti adapters and an unmanaged Netgear switch, so I am pretty confident the problem is with the switch.
When I fitted the switch originally ( having updated firmware on the bench and setup the ports for the correct voltage ), with unit off, I took the cables out of the Ubiquiti adapters and connected them to the switch ports, I then powered on the switch, I could not log in to switch because it did not get an IP address, DHCP not working, I set laptop IP with a static so I could log in and change IP from default to a static in local range.
Everything seemed OK until the evening when under load and the ports started dropping for 90secs, updated firmware to 1.2.4, ports still dropping when under load, tried un-ticking loop protection, OK with light traffic, still dropping data under load.
When I fitted the switch originally ( having updated firmware on the bench and setup the ports for the correct voltage ), with unit off, I took the cables out of the Ubiquiti adapters and connected them to the switch ports, I then powered on the switch, I could not log in to switch because it did not get an IP address, DHCP not working, I set laptop IP with a static so I could log in and change IP from default to a static in local range.
Everything seemed OK until the evening when under load and the ports started dropping for 90secs, updated firmware to 1.2.4, ports still dropping when under load, tried un-ticking loop protection, OK with light traffic, still dropping data under load.
Who is online
Users browsing this forum: No registered users and 26 guests