DC switch oddity noted
-
rockhead - Experienced Member
- Posts: 119
- Joined: Mon Aug 04, 2014 7:09 pm
- Has thanked: 53 times
- Been thanked: 35 times
Re: DC switch oddity noted
Yes, exacyly. I cannot say with 100% certainty about the power led, but I believe it was also off, sunny day and dark glasses don't help, but I'm pretty sure that light was as bright as the port leds when running normally.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC switch oddity noted
Are you powering any device with the second Ethernet port of the LigoPTP Unity Radio? (POE Pass Through)
Are you using any Ethernet Surge Protector, if so try taking it out of the loop.
Are you using any Ethernet Surge Protector, if so try taking it out of the loop.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC switch oddity noted
I don't know then, everything looks fine on your Tabs?
I want to say maybe in-rush of the LigoPTP possibly and since your only driving this with 12 Volts your POE budget is less than 150 watts (might be only 100 watts at 12V) and when the LigoPTP powers up it is grabbing to much current?
I know their PDF says 15 watts?
Since it is 802.3af you might want to try 48VH but you would want to verify with the manufacturer since their PDF does not specify if it will accept 802.3af Mode A or Mode B or both?
My assumption is that since it is 1G port 48VH would be safe to try?
How many feet of Ethernet cable is on this radio?
What size and length of wire is connecting the switch to the battery?
What type and brand of battery, maybe the battery is dropping voltage below 9V for a second when the switch draws power to power the LigoPTP?
I want to say maybe in-rush of the LigoPTP possibly and since your only driving this with 12 Volts your POE budget is less than 150 watts (might be only 100 watts at 12V) and when the LigoPTP powers up it is grabbing to much current?
I know their PDF says 15 watts?
Since it is 802.3af you might want to try 48VH but you would want to verify with the manufacturer since their PDF does not specify if it will accept 802.3af Mode A or Mode B or both?
My assumption is that since it is 1G port 48VH would be safe to try?
How many feet of Ethernet cable is on this radio?
What size and length of wire is connecting the switch to the battery?
What type and brand of battery, maybe the battery is dropping voltage below 9V for a second when the switch draws power to power the LigoPTP?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
rockhead - Experienced Member
- Posts: 119
- Joined: Mon Aug 04, 2014 7:09 pm
- Has thanked: 53 times
- Been thanked: 35 times
Re: DC switch oddity noted
The power on other netonix->ligo's usually hangs around 11 watts IIRC
Their support says no to passive POE so its only if I'm feeling lucky ( and on site ) can I try that
Radio is on < 70 feet of cat5e
Switch connected to battery bank by ~ 1 foot of 8 gauge wire
Battery bank is 8 x 100AH with less than a week in service so ... no shortage of power there
Their support says no to passive POE so its only if I'm feeling lucky ( and on site ) can I try that
Radio is on < 70 feet of cat5e
Switch connected to battery bank by ~ 1 foot of 8 gauge wire
Battery bank is 8 x 100AH with less than a week in service so ... no shortage of power there
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC switch oddity noted
Why are you running 12V instead of 24V?
I do not know, maybe the radio is bad or the switch but you said it worked fine before the LigoPTP?
I do not know, maybe the radio is bad or the switch but you said it worked fine before the LigoPTP?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
rockhead - Experienced Member
- Posts: 119
- Joined: Mon Aug 04, 2014 7:09 pm
- Has thanked: 53 times
- Been thanked: 35 times
Re: DC switch oddity noted
Running 12V as that is the way this site started and would be expensive to convert.
Perhaps in your spare time you could rig up a similar test and see if this is a reproduceable phenomena ?
Perhaps in your spare time you could rig up a similar test and see if this is a reproduceable phenomena ?
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC switch oddity noted
rockhead wrote:Running 12V as that is the way this site started and would be expensive to convert.
Perhaps in your spare time you could rig up a similar test and see if this is a reproduceable phenomena ?
Spare time?
I would love to but I do not have one of those LigoPTP radios?
I think it revolved around that radio somehow?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
rockhead - Experienced Member
- Posts: 119
- Joined: Mon Aug 04, 2014 7:09 pm
- Has thanked: 53 times
- Been thanked: 35 times
Re: DC switch oddity noted
sirhc wrote:rockhead wrote:Running 12V as that is the way this site started and would be expensive to convert.
Perhaps in your spare time you could rig up a similar test and see if this is a reproduceable phenomena ?
Spare time?
I would love to but I do not have one of those LigoPTP radios?
I think it revolved around that radio somehow?
So sub in some other 802a3af device or even just 48V passive device. Ya spare time
, you know what you have when you're not doing customer service at midnight 
.When I get my next DC switch I can setup a similar test, until then I'm dependent on you
<grin>-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: DC switch oddity noted
rockhead
I just set up a system in the lab & trying your setup works fine every time.
However, it did shut off the first time i tried it because I had my current limit set to low on my lab dc supply. That will happen
if our dc-dc switch supply can't get enough current it will shut down & not start up again until power has been removed completely.
Not saying this is the issue for sure, but when you are running at 12 volts input you will need about 5 amps or more to run your 50 watt load, and you will need
a lot more for surge power when devices switch on.
Even though you say battery's are fresh, can you make sure cable from batteries to our switch is good & heavy AWG and a real good contact to your battery's.
I will continue to try to make it fail, but no luck so far.
Dave
I just set up a system in the lab & trying your setup works fine every time.
However, it did shut off the first time i tried it because I had my current limit set to low on my lab dc supply. That will happen
if our dc-dc switch supply can't get enough current it will shut down & not start up again until power has been removed completely.
Not saying this is the issue for sure, but when you are running at 12 volts input you will need about 5 amps or more to run your 50 watt load, and you will need
a lot more for surge power when devices switch on.
Even though you say battery's are fresh, can you make sure cable from batteries to our switch is good & heavy AWG and a real good contact to your battery's.
I will continue to try to make it fail, but no luck so far.
Dave
Who is online
Users browsing this forum: Google [Bot] and 53 guests