The WS-6-MINI appears to accept DC+ on Pins 1,2,4,5 and DC- on 3,6,7,8
We are powering the unit with Tycon TP-POE-HP-56G 100watt POE injector that sends DC+ on pins 3,4,5,6 and DC- on 1,2,7,8
Our POE is essentially is sending power backwards on pins 1,2,3,6... but it works regardless.
Is the switch correcting the polarity on those pins? Or is it just shutting down power on those pins? We want to know if we can still power 100watts of gear with this POE injector.
Thanks
WS-6-MINI POE In
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-6-MINI POE In
Our switch can accept reverse polarity on POE "IN" on Port 1
See this post viewtopic.php?f=6&t=819&p=7083&hilit=bridge#p6405
See this post viewtopic.php?f=6&t=819&p=7083&hilit=bridge#p6405
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 41 guests