Port throughput incorrect
-
Alyrica - Member
- Posts: 1
- Joined: Wed Dec 02, 2015 5:44 pm
- Location: Philomath, OR
- Has thanked: 0 time
- Been thanked: 0 time
Port throughput incorrect
Just put up a new WS-12-250-DC, and it shows between 50-150mbps TX from port on and RX on port 13... but when I login to the devices on those ports, they show ~20mbps max. Any ideas?
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Port throughput incorrect
What device?
We report 1 second average most devices report a larger time span average.
I have checked our stats before and they are spot on.
We report 1 second average most devices report a larger time span average.
I have checked our stats before and they are spot on.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Port throughput incorrect
something to keep in mind is that when you log in to a switch and don't select a specific port. the switch reads the aggregate throughput.
I.E. 20Mb in Port 1 and 20Mb out port 8 would show up as 20Mb TX and 20Mb RX at the top right and on the graphs at the bottom.
IF pirt 5 starts moving 20Mb of traffic than it'll show 40x40, etc.
Clicking on the port itself will show what that port is moving. I've checked several times between what we graph and what the mikrotik router shows in real time and the switch has always tracked along and showed the correct values.
I.E. 20Mb in Port 1 and 20Mb out port 8 would show up as 20Mb TX and 20Mb RX at the top right and on the graphs at the bottom.
IF pirt 5 starts moving 20Mb of traffic than it'll show 40x40, etc.
Clicking on the port itself will show what that port is moving. I've checked several times between what we graph and what the mikrotik router shows in real time and the switch has always tracked along and showed the correct values.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 63 guests