SNMP ifspeed missing?

[sporkman]

Just a quick note, pointed mrtg's "cfgmaker" at a switch today and it spit out a config with all interfaces marked as down because the snmp ifspeed was unavailable.

Seems like a pretty standard part of the interface mib, so I'll assume an oversight.

A quick workaround is this:

Code: Select all

 cfgmaker --zero-speed=100000000 --ifdesc=descr some-string@10.1.1.12 > some-config.cfg

The "zero-speed" flag both sets a default speed (100Mb/s above) and also makes cfgmaker mark the ports as up.

[Eric Stern]

ifSpeed was added in 1.3.9

[sporkman]

Thanks for the quick reply!