How worried should we be about these log messages due to using 56V POEs for the 6 port netonix models? On a related but different topic: will you be adding input POE voltage as a value to the UI and snmp anytime soon?
May 18 14:41:57 switch[1344]: 48V is out of range (54.2V)
May 18 14:42:07 switch[1344]: 48V is out of range (53.6V)
May 18 14:42:27 switch[1344]: 48V is out of range (55.3V)
May 18 14:43:27 switch[1344]: 48V is out of range (55.0V)
best,
-amen
High Input Voltage
-
amen - Member
- Posts: 1
- Joined: Tue Sep 29, 2015 4:39 pm
- Location: San Francisco, CA
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: High Input Voltage
56V is near the high end of what the unit is designed/safe to accept. I think it "might" survive up close to 60V "maybe"
Keep in mind that id you put 56V in that is what it puts out as 48V POE
I think v1.4.0rc25 increases the acceptable input range but I think it is 53V not 56V.
Keep in mind that id you put 56V in that is what it puts out as 48V POE
I think v1.4.0rc25 increases the acceptable input range but I think it is 53V not 56V.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: High Input Voltage
latest code for the WS-6-MINI has valid input power at 57 volts, after internal bridge rectifier, which equates to 58 volts external supply voltage being valid.
Albeit, someone running that close to the edge is playing with fire, because it is the maximum allowed.
Albeit, someone running that close to the edge is playing with fire, because it is the maximum allowed.
-
eomedia - Member
- Posts: 46
- Joined: Wed Jun 03, 2015 6:56 pm
- Location: Aurora, CO
- Has thanked: 5 times
- Been thanked: 4 times
Re: High Input Voltage
It sound like using the Tycon 56v Passive PoE would be okay then - should not generate any errors?
http://tyconsystems.com/index.php/dc-pa ... -2456g-vhp
http://tyconsystems.com/index.php/dc-pa ... -2456g-vhp
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: High Input Voltage
eomedia wrote:It sound like using the Tycon 56v Passive PoE would be okay then - should not generate any errors?
http://tyconsystems.com/index.php/dc-pa ... -2456g-vhp
Yea also considering you will have voltage drop on the cable so it will not be 56V when it gets there
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 63 guests