Page 1 of 2
WS-12-250 DC Log Message Cold Boot
Posted: Wed Aug 10, 2016 12:38 pm
by Wireless-DSL
Hi,
we have Problem with Netonix WS-12-250-DC Powered with 12 VDC with Solar and Battery.
Jan 1 01:00:51 switch[778]: Detected cold boot
Firmware Version
1.4.2
Board Rev
E
Power Supply Firmware Version
46
Power Supply Board Rev
A
This Board is mounted in metal Case an there is no FM Tower.
The next Tower is about 5km away (GSM)
The Switchs Powers
1x Mikrotik Netbox
1x Mikrotik SXT AC
1x Mikrotik DynaDish
Total Watt Used 17-20W.
The Switch rebooted once a day.
what can we do?
thanks for answer
Wireless-DSL
Re: WS-12-250 DC Log Message Cold Boot
Posted: Wed Aug 10, 2016 1:09 pm
by sirhc
Well my "guess" since you have not provided any information to draw any definitive conclusions would be the input voltage dropped below the hibernate voltage which the default lowest is 9V.
How many batteries are powering the switch?
What model batteries are they?
How are the batteries connected together (series or parallel)?
What is charging the batteries?
Post up pictures (screen grabs) of the the following Tabs:
Status
Power
Device/Status
Device/Configuration
Re: WS-12-250 DC Log Message Cold Boot
Posted: Wed Aug 10, 2016 1:52 pm
by Wireless-DSL
Hi,
here are the Pictures:
- Netonix Conf2.tiff (30.94 KiB) Viewed 5636 times
- Netonix Conf1.tiff (291.89 KiB) Viewed 5636 times
- Netonix Status 10-08.tiff (233.95 KiB) Viewed 5636 times
- Netonix Power.tiff (184.69 KiB) Viewed 5636 times
- Netonix Status.tiff (233.8 KiB) Viewed 5636 times
Voltage is never under 12,4 V, the switch rebooted today with fully charged Battery
Battery is 12v 150 AH VARTA DEEP CYCLE AGM
Solar is
6x 180WP Solar Pannel connected to
EP Solar ET-6415 Solar MPPT Tracker
mistry7
Re: WS-12-250 DC Log Message Cold Boot
Posted: Wed Aug 10, 2016 2:57 pm
by sirhc
Can not see your picture.
You need to upload the pictures.
look at the link below the blue buttons that says upload attachment
Go back and edit your post and upload the attachments (read the instructions on the screen where you create your post)
Re: WS-12-250 DC Log Message Cold Boot
Posted: Wed Aug 10, 2016 6:12 pm
by Wireless-DSL
over people can see, the pictures are viewed 10 times
Re: WS-12-250 DC Log Message Cold Boot
Posted: Wed Aug 10, 2016 6:37 pm
by sirhc
Wireless-DSL wrote:over people can see, the pictures are viewed 10 times
No they are seeing the icon in place of the pictures.
I can not see them and no one else can.
You need to upload them to the forums so other people can see them
Below is what other people see, I would not say so unless it was so.
Re: WS-12-250 DC Log Message Cold Boot
Posted: Thu Aug 11, 2016 2:59 am
by Wireless-DSL
I did Upload the pictures!
Why i Can See them on all my devices
And you not?
Re: WS-12-250 DC Log Message Cold Boot
Posted: Thu Aug 11, 2016 7:45 am
by sirhc
Maybe because they are .tif
Can you edit your above post and post them as .png format?
Re: WS-12-250 DC Log Message Cold Boot
Posted: Thu Aug 11, 2016 9:24 am
by lligetfa
I cannot see them inline either, probably cuz they are in tiff format. I can download the pic and see it that way.
Re: WS-12-250 DC Log Message Cold Boot
Posted: Fri Aug 12, 2016 8:34 am
by Wireless-DSL