Switch doesn't boot anymore
Posted: Fri Jan 06, 2017 10:47 am
Hi,
we are currently having a problem with a switch that doesn't boot. Here's the output of the console :
Dec 31 19:00:04 kernel: mtd: partition "rootfs" set to be root filesystem
Dec 31 19:00:04 kernel: 0x00b00000-0x00f40000 : "rootfs_data"
Dec 31 19:00:04 kernel: 0x00f40000-0x00f80000 : "FIS directory"
Dec 31 19:00:04 kernel: 0x00f80000-0x00f81000 : "RedBoot config"
Dec 31 19:00:04 kernel: 0x00fc0000-0x01000000 : "Redundant FIS"
Dec 31 19:00:04 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 19:00:04 kernel: TCP Dec 31 19:00:04 Dec 31 19:00:04 Dec 31 19:00:04 vtss_core: module license '(c) Vitesse Semiconductor Inc.' taints kernel.
switch: 'Luton26' board detected
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
i2c /dev entries driver
i2c_vcoreiii i2c_vcoreiii: i2c bus driver on IRQ 19
vtss_cmn_qce_del:893 qce_id: 1 not found
*** it stop here.
I tried to reset to factory default without success,
There was an electrical problem at the place where this switch was installed. Does it need to be repaired ?
Thank you
we are currently having a problem with a switch that doesn't boot. Here's the output of the console :
Dec 31 19:00:04 kernel: mtd: partition "rootfs" set to be root filesystem
Dec 31 19:00:04 kernel: 0x00b00000-0x00f40000 : "rootfs_data"
Dec 31 19:00:04 kernel: 0x00f40000-0x00f80000 : "FIS directory"
Dec 31 19:00:04 kernel: 0x00f80000-0x00f81000 : "RedBoot config"
Dec 31 19:00:04 kernel: 0x00fc0000-0x01000000 : "Redundant FIS"
Dec 31 19:00:04 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 31 19:00:04 kernel: TCP Dec 31 19:00:04 Dec 31 19:00:04 Dec 31 19:00:04 vtss_core: module license '(c) Vitesse Semiconductor Inc.' taints kernel.
switch: 'Luton26' board detected
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
i2c /dev entries driver
i2c_vcoreiii i2c_vcoreiii: i2c bus driver on IRQ 19
vtss_cmn_qce_del:893 qce_id: 1 not found
*** it stop here.
I tried to reset to factory default without success,
There was an electrical problem at the place where this switch was installed. Does it need to be repaired ?
Thank you