Voltage and Thermal Errors on Status Page
-
MrBook - Member
- Posts: 5
- Joined: Thu Dec 04, 2014 3:13 pm
- Has thanked: 0 time
- Been thanked: 0 time
Voltage and Thermal Errors on Status Page
Noticed this in one of my switches this morning. Had a power outage the other day and the batteries did go the expected run time. Anyone seen something like this before? Not sure if Switch, P.S. or bad battery(s).
- Attachments
-
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Voltage and Thermal Errors on Status Page
Try a UI reboot but if no joy do a power cycle - SHOULD FIX IT
If not then you can try opening the chassis and checking the I2C cable between power supply and switch, if still no joy then down to RMA but think reboot or power cycle will fix it as this sometimes can occur.
Also take this time to upgrade firmware
If not then you can try opening the chassis and checking the I2C cable between power supply and switch, if still no joy then down to RMA but think reboot or power cycle will fix it as this sometimes can occur.
Also take this time to upgrade firmware
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 73 guests