Page 1 of 1
Port failure and odd cable testing results
Posted: Mon Dec 02, 2019 12:25 am
by unwired
Lost an access point this evening. Its a AF-Rocket radio, running 48VH. When I send power to the radio I see the normal wattage indicating it is powered and running properly. But the links remains down. Cable test results don't make any sense:
- Cable test image
This morning another one on the same switch went down:
Re: Port failure abd odd cable testing results
Posted: Mon Dec 02, 2019 6:52 pm
by unwired
Went to the site, found the ethernet cable in port 1 was filled with water, and dripping onto port 3 as well.
Re: Port failure and odd cable testing results
Posted: Sun Dec 08, 2019 5:37 pm
by picasso
Moving from the Bay and having the loss of unwired ltd was crushing to me....if your that unwired.
Re: Port failure abd odd cable testing results
Posted: Tue Dec 17, 2019 9:27 pm
by jpaine619
unwired wrote:Went to the site, found the ethernet cable in port 1 was filled with water, and dripping onto port 3 as well.
Ouch.. That sucks! If nothing else, the ETH-SP's at least give you a break in the line and would prevent that from happening (as long as you have the appropriate drip loops of course)