Netonix Forums

Hello,

First off, I love my Netonix switches. They are beautiful.

I setup a LAG using two Netonix mini switches and 4 x Ignitenet radios - it works really well, yay!

If I simply unplug the Ignitenet radios and plug in 4 preconfigured Cambium or Ubiquiti radios the LAG does not work. It was very simple to setup and get working using the Ignitenet radios, and I have tried changing every possible setting on the switches but cannot get success.

The Cambium and UBNT radios are setup in bridge mode so should be transparent links. I can't understand what i'm doing wrong. Surely these manufacturers don't block LACP packets, so it must be something i'm missing.

Any help would be much appreciated.

Thanks!

Jimmy McJimjim

Cambium and Ubnt model ?

I've tried Airfiber60LR first, as this was the goal but, I also tried some little Nanostation Loco AC too.

With Cambium I've tried F300-25 and -16 and next I will try PTP550 - but I think they will all be the same as running same firmware.

Thanks