One of our networks makes heavy use of ToughSwitch units > 50 of them (both 5 ports and 8 ports).
Much of this network depend on UBNT's RSTP implementation with careful settings of ports' priorities, and path-costs to ensure a stable steady state.
I wish to gradually swap out ToughSwitches for Netonix switches - what sort of interoperability issues are we to expect on the RTSP front?
Has anyone done this, or are we trailblazing here?
RSTP interoperability with ToughSwitch
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: RSTP interoperability with ToughSwitch
We followed the 802.1D, 801.1s, and 802.1w standards so as long as they did they should work together?
Well to be honest we followed IEEE 802.1Q-2014 because even though we have not yet implemented it the switch is capable of MSTP or multiple spanning tree.
Well to be honest we followed IEEE 802.1Q-2014 because even though we have not yet implemented it the switch is capable of MSTP or multiple spanning tree.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
yahel - Member
- Posts: 54
- Joined: Wed May 27, 2015 12:07 am
- Location: Berkeley, CA
- Has thanked: 14 times
- Been thanked: 11 times
Re: RSTP interoperability with ToughSwitch
Okay - sounds good...
I'm still really worried...
We'll know for sure in a week or so...
Thanks!
I'm still really worried...
We'll know for sure in a week or so...
Thanks!
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: RSTP interoperability with ToughSwitch
Let us know
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: RSTP interoperability with ToughSwitch
I already tryed and it worked.
Be sure to have a VLAN untag on port with RSTP enable on the toughswitch else STP won't detect the loop. It's not a compatibility issue since it's happen between 2 toughswitchs. Ubnt just don't care about this problem, I writed to them several time and support only answered that engineer are check it. I reported the problem 8~9 month ago. Anyway, if it work right now, I presume your not using only tagged port on some port.
Be sure to have a VLAN untag on port with RSTP enable on the toughswitch else STP won't detect the loop. It's not a compatibility issue since it's happen between 2 toughswitchs. Ubnt just don't care about this problem, I writed to them several time and support only answered that engineer are check it. I reported the problem 8~9 month ago. Anyway, if it work right now, I presume your not using only tagged port on some port.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests