Netonix Forums

Posted: **Mon Jun 08, 2015 1:26 pm**

getting ready to put 8 additional AC45 sectors with shields on 600 ft tower, and replacing switches with modified Netonix switches to make them DC :)

Posted: **Mon Jun 08, 2015 1:52 pm**

just curious, what's your channel plan on this 8x rig?

Posted: **Mon Jun 08, 2015 8:19 pm**

Channel plan is to find least noisy channel to operate on in any given direction :) I run 10 mhz channels so it's not real hard to avoid self interference, especially with rfarmor shielding. This will be in addition to the 10 sectors and 4 backhauls that are already up there. There will be two 14 port netonix switches converted to DC and pretty much all the ports will be used.

Posted: **Mon Jun 08, 2015 11:03 pm**

curious how you like those AC45. I have a couple AC60 and am THOROUGHLY disappointed. It's like it's a 45 degree sector with some extra noise catching area at the edges :/

Posted: **Wed Jun 10, 2015 9:19 pm**

I like the 45s, they are really quiet.

Here is screenshot of one of the modified switches....DC power baby! Port 1 is powering mimosa, port 11 radwin and the rest are ubiquiti rockets.

: Capture.JPG (54.22 KiB) Viewed 15280 times

I went from this...

: IMG_20150609_100422570[1].jpg (225.21 KiB) Viewed 15280 times

To this....I know, still needs some work :willy:

: IMG_20150609_173933201[2].jpg (262.8 KiB) Viewed 15280 times

Posted: **Fri Feb 19, 2016 5:30 am**

Hi

How are you getting your Radwin to run at Gigabit? I have a number of 2000Cs and they all seem to run at 100Mbit/sec although I understand they can run at Gigabit (somehow!) - not sure if it is to do with hardware versions?

Netonix Forums

preparing for tower upgrade

preparing for tower upgrade

Re: preparing for tower upgrade

Re: preparing for tower upgrade

Re: preparing for tower upgrade

Re: preparing for tower upgrade

Re: preparing for tower upgrade