Anybody played with the new RF Elements sectors? They look pretty good to me.
http://sectorcc.rfelements.com/
RF Elements new sectors?
-
rebelwireless - Experienced Member
- Posts: 607
- Joined: Mon Sep 01, 2014 1:46 pm
- Has thanked: 31 times
- Been thanked: 136 times
-
WisTech - Associate
- Posts: 213
- Joined: Mon Aug 04, 2014 3:57 pm
- Has thanked: 8 times
- Been thanked: 64 times
Re: RF Elements new sectors?
Those are great looking units and a freaking hell of a price. $140 MSRP for a dual pol 20dBi 5Ghz sector?! 74º at -3dB.
-
rebelwireless - Experienced Member
- Posts: 607
- Joined: Mon Sep 01, 2014 1:46 pm
- Has thanked: 31 times
- Been thanked: 136 times
Re: RF Elements new sectors?
WisTech wrote:Those are great looking units and a freaking hell of a price. $140 MSRP for a dual pol 20dBi 5Ghz sector?! 74º at -3dB.
yeah, that's what I was thinking. nice edges to help cut off side lobes, nice even patter H and V..
....'rumor' has it that if you pair the 3x3 sector (they are V/V/H or V/H/H) with a 'tik 3 chain AC radio (ahem...NetMetal5) that you get a few dB noise isolation from the chip's MU-MIMO....
I wouldn't run the 'tik stuff though 'cause of their lack of any efforts with the FCC (i'd like to stay in business!).
-
rkelly1 - Experienced Member
- Posts: 147
- Joined: Wed Aug 20, 2014 10:06 pm
- Location: Clermont, FL
- Has thanked: 12 times
- Been thanked: 27 times
Re: RF Elements new sectors?
Has anybody tried the RF Elements Symmetrical Sectors? http://simper.rfelements.com/ - there are adapters for M5, Rocket 5 AC radios. Interesting concept. Any idea if it provides a benefit?
-
rebelwireless - Experienced Member
- Posts: 607
- Joined: Mon Sep 01, 2014 1:46 pm
- Has thanked: 31 times
- Been thanked: 136 times
Re: RF Elements new sectors?
rkelly1 wrote:Has anybody tried the RF Elements Symmetrical Sectors? http://simper.rfelements.com/ - there are adapters for M5, Rocket 5 AC radios. Interesting concept. Any idea if it provides a benefit?
I'm on the list, should start showing up mid-July.
-
WirelessRudy - Member
- Posts: 58
- Joined: Tue Aug 04, 2015 7:44 pm
- Location: Castalla, Spain
- Has thanked: 3 times
- Been thanked: 2 times
Re: RF Elements new sectors?
Here in Europe (and THAT's where they come from!) not found a single supplier yet having them in stock.....rebelwireless wrote:rkelly1 wrote:Has anybody tried the RF Elements Symmetrical Sectors? http://simper.rfelements.com/ - there are adapters for M5, Rocket 5 AC radios. Interesting concept. Any idea if it provides a benefit?
I'm on the list, should start showing up mid-July.
-
WirelessRudy - Member
- Posts: 58
- Joined: Tue Aug 04, 2015 7:44 pm
- Location: Castalla, Spain
- Has thanked: 3 times
- Been thanked: 2 times
Re: RF Elements new sectors?
Got myself a 75-100 17dBi Carrier class and whooow what a performance increase compared to a normal sector.rebelwireless wrote:Anybody played with the new RF Elements sectors? They look pretty good to me.
http://sectorcc.rfelements.com/
We had some issues in congested spectrum with other sectors and with 10 users couldn't get more than 20Mb from customers over a NetMetal. Combined with the RF Elements we have now 20 clients to same sector, some are enabled to use up to 15Mb and indeed I have tested with downloads to 4 or 5 customers and reached easy 50Mbps.....
I am very happy with these and am dying to buy more. High expectations for the symmetrical sectors too. But not available yet....
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: RF Elements new sectors?
Look just like Cambium 5 Ghz ePMP sector. The 17 db should be fine for GPS Sync since those need a 30~35 FTB ratio for same channel use back to back and a good enough SNR to achieve MCS15. Anyway, I would play safe and take Cambium sector.
8 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests