Page 1 of 1
large verticle beamwidth sector?
Posted: Thu Aug 27, 2015 10:51 pm
by rebelwireless
Anyone know of an available-today 5Ghz sector with 20 degrees verticle beamwidth? I have 1 available UNII3 20Mhz channel and need to cover an area that is between 10 and 30 degrees downtilt on a single sector and about 90degrees wide, with ubnt AC gear. This is between 2 and 8km out so I don't need a ton of gain. DFS (if it were available in ubnt AC radios) isn't enough to cover the 6-8km links so not an option on EIRP and equipment capabilities.
I would also settle for something that had a soft drop off on the lower part of the beam. I could stand to lose 10dBi on the bottom as long as I could still get about 20degrees.
Re: large verticle beamwidth sector?
Posted: Thu Aug 27, 2015 11:54 pm
by lligetfa
I have no experience with Simper but they might be worth a look.
http://simper.rfelements.com/
Re: large verticle beamwidth sector?
Posted: Thu Aug 27, 2015 11:55 pm
by rebelwireless
Not available
Re: large verticle beamwidth sector?
Posted: Fri Aug 28, 2015 12:24 am
by ste
rebelwireless wrote:Not available
Paperware. Long time announced/promised.
Re: large verticle beamwidth sector?
Posted: Wed Oct 07, 2015 3:08 pm
by WirelessRudy
According their newsletter they are now open for orders....
Re: large verticle beamwidth sector?
Posted: Mon Dec 07, 2015 6:24 pm
by rebelwireless
Yes, except the aren't. No distributors. Titan wireless was supposed to but nothing yet.
Re: large verticle beamwidth sector?
Posted: Tue Dec 08, 2015 9:50 pm
by mike99
Not sur for 20 degrees but I would try Ubnt base station without shield kit. Maybe not using top and bottom plate on shield kit could also work.
Re: large verticle beamwidth sector?
Posted: Tue Dec 08, 2015 10:00 pm
by rebelwireless
Narrow beam. Simper seems to be about the only thing but can't get ahold of them yet.