Netonix Forums

I don't see an OID for the switch's total power consumption (wattage). Would it be possible to add this in future versions?

Currently only power usage per port is reported not total for the switch.

In what table is power consumption per port? I don't see that either.

I see:

* fanTable
* tempTable
* voltageTable (board voltages)
* poeStatusTable

Here are posts to read:
viewtopic.php?f=17&t=1253
viewtopic.php?f=17&t=251

Its not in the Netonix MIB, its in the standard Power Ethernet MIB.

7: pethMainPseOperStatus.1 off(2)
388: pethMainPseOperStatus.2 off(2)
389: pethMainPseOperStatus.3 off(2)
390: pethMainPseOperStatus.4 off(2)
391: pethMainPseOperStatus.5 off(2)
392: pethMainPseOperStatus.6 off(2)
393: pethMainPseOperStatus.7 off(2)
394: pethMainPseOperStatus.8 off(2)
395: pethMainPseOperStatus.9 off(2)
396: pethMainPseOperStatus.10 off(2)
397: pethMainPseOperStatus.11 off(2)
398: pethMainPseOperStatus.12 off(2)
399: pethMainPseOperStatus.13 off(2)
400: pethMainPseOperStatus.14 off(2)
401: pethMainPseConsumptionPower.1 0
402: pethMainPseConsumptionPower.2 0
403: pethMainPseConsumptionPower.3 0
404: pethMainPseConsumptionPower.4 0
405: pethMainPseConsumptionPower.5 0
406: pethMainPseConsumptionPower.6 0
407: pethMainPseConsumptionPower.7 0
408: pethMainPseConsumptionPower.8 0
409: pethMainPseConsumptionPower.9 0
410: pethMainPseConsumptionPower.10 0
411: pethMainPseConsumptionPower.11 0
412: pethMainPseConsumptionPower.12 0
413: pethMainPseConsumptionPower.13 0
414: pethMainPseConsumptionPower.14 0

I'll add total power consumption to our list of requested features.

Ah ha. Thanks, Eric.

I know this one sank to the bottom, but I would like to see the total wattage added to the MIB.

isaacu wrote:I know this one sank to the bottom, but I would like to see the total wattage added to the MIB.

Forum search is your friend.

viewtopic.php?f=6&t=2156&p=15469&hilit=total+power#p15469