Netonix Forums

Hello
We have a question about a power failure and charging on a 12v battery
I explain that our switches are connected on batteries and in the event of power failure the POE turns off and the battery remains at an emergency load of about 30%
However the WS-DC 8 OR 12 switch consumes a low energy of about 0.4 Ah ...
Can the LEDs be turned off to conserve the remaining charge of a battery?
Or do you have a solution to save the maximum current at each long power outage ...
Thank you

THe WS-12-250-DC and the WS-26-500-DC will go into hibernate mode at the voltage you tell it to and will only consume about 0.1 watts in this mode

The WS-8-150-DC does not offer this hibernate feature.

If you want to conserve power on long outages use the WS-12-250-DC or WS-26-500-DC