WS-6MINI - 24V is out of range

[f.cucci@el-com.it]

Dear all,

on my WS-6 Mini I see in the log file some lines like those :


May 2 21:01:18 switch[854]: 24V is out of range (22.8V)
May 3 01:30:14 switch[854]: 24V is out of range (22.8V)
May 3 13:20:08 switch[854]: 24V is out of range (22.8V)
May 4 04:09:07 switch[854]: 24V is out of range (22.7V)
May 4 08:21:32 switch[854]: 24V is out of range (22.8V)
May 4 20:54:03 switch[854]: 24V is out of range (22.7V)
May 4 23:19:58 switch[854]: 24V is out of range (22.7V)
May 5 02:25:47 switch[854]: 24V is out of range (22.7V)
May 5 08:22:07 switch[854]: 24V is out of range (22.8V)
May 5 18:45:01 switch[854]: 24V is out of range (22.7V)
May 5 23:40:13 switch[854]: 24V is out of range (22.8V)
May 6 00:31:22 switch[854]: 24V is out of range (22.8V)
May 6 01:43:16 switch[854]: 24V is out of range (22.7V)
May 7 09:23:13 switch[854]: 24V is out of range (22.7V)

If I connect a ePMP2000 on port 4, after 24/36 hours the radio gaes down; if I change on port 5 the radio works good.

Can you tell me why I have this behavior ?

Thank you in advance.

[sirhc]

Possible causes:
1) Switch is defective
2) Switch is damaged
3) Something else is afoot

Swap unit out with spare unit:
If issue remains with new switch then look at #3
If issue goes away then it is either #1 or #2 which means you need to RMA the unit

Also notice you have OLD firmware.