I'm wondering how the CAP-FXS will handle NAT traversal for SIP/RTP, will it be similar to a Cisco SPA112 ATA?
Whenever deploying an SPA112 (or the old PAP2T) it just works like plug and play, even behind double NAT without needing to configure STUN or anything.
It will also stay working if I changeover to a backup ISP (different address) and it registers to the VoIP provider with the new public address.
Will CAP-FXS work similar?
NAT Traversal
-
wisphopefull - Member
- Posts: 36
- Joined: Mon Aug 04, 2014 2:50 pm
- Has thanked: 5 times
- Been thanked: 3 times
-
sirhc - Employee
- Posts: 7415
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: NAT Traversal
i WILL HAVE TO TEST THOSE BUT IT SHOULD
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: NAT Traversal
When I get one or two I'll be sure to report back.... *hint* *hint*
-
rebelwireless - Experienced Member
- Posts: 607
- Joined: Mon Sep 01, 2014 1:46 pm
- Has thanked: 31 times
- Been thanked: 136 times
Re: NAT Traversal
A single SPA112 will work with NAT without anything fancy, but plug a second one in and now SIP ports can't NAT because they are already NAT'd. You need to use a different SIP port for the second SPA112.
Also, the SPA112 tries to UPNP map by default BUT it doesn't try an alternate SIP port so you still have the issue that only 1 works at a time.
They do work great if you set each SPA112 to use different RTP ports and a different SIP port though. NAT maps the RTP without issue because the SIP channel advertises available RTP ports and there is no overlap by config.
Also, the SPA112 tries to UPNP map by default BUT it doesn't try an alternate SIP port so you still have the issue that only 1 works at a time.
They do work great if you set each SPA112 to use different RTP ports and a different SIP port though. NAT maps the RTP without issue because the SIP channel advertises available RTP ports and there is no overlap by config.
4 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 15 guests