Netonix Forums

Something small enough to hold a single Nanobridge etc. Thinking a 1' wide 1' deep for single block on each side of peak.

Is this too big?

http://www.radioshack.com/winegard-ds-1 ... 30412.html

Something like but smaller than this

http://www.montanasatellitesupply.com/H ... pr-pek.htm

If you are not averse to a DIY solution, you could take a small tripod and lag bolt two 16"x24" concrete pavers to it, one with two legs on it and the other with one leg with some chain between the two.

If 16"x24" is too big, you could go with three smaller pavers, maybe the round ones. You'd want the one that is by itself on the other side to be bigger to balance the weight of the other two.

Magician wrote:Something small enough to hold a single Nanobridge etc. Thinking a 1' wide 1' deep for single block on each side of peak.

The first time i read this, I did not realize that you were looking for a ridge mount. Good luck finding that. You are probably going to have to fabricate it yourself.

I don't think anybody makes one for a single block -- it's not really enough weight on each side.

https://www.bairdmounts.com/products/wi ... 001&fid=61