We're having a frustrating problem across a variety of different netonix switches with "loose" ports. The slightest wiggle will often drop the ethernet link, even if power remains on. Often when someone is working on a box, something will get bumped and we'll lose a link. This morning we have a new 2' cable between a WS-6-MINI and an AF5X dropping ethernet. We have another with a 100ft cable in a WS-12-250A doing the same thing.
We are using Netonix / RF Armor ends. We've noticed this most often on Airfiber (24 and X models), but other devices have also had the same issue. We've changed crimpers and brands, always test the cables with a fluke tester. We can make the problem happen by just lightly wiggling the cable side to side a little bit.
Is anyone else having this issue at all? Are we just doing something wrong?
RJ45 ends/ports "loose"
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: RJ45 ends/ports "loose"
I am not sure what you might be doing wrong but I do not have this issue?
Sometimes I have to bend the ends tang up a little so it latches properly.
Sometimes I have to bend the ends tang up a little so it latches properly.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 37 guests