I have a spare unit that is configured as backup and ready to go - I might try installing it.
Do you think a hard reboot might help?
You are probably right in that it is not the switch, but it is strange that the switch is completely inaccessible from VLAN1 during an outage.
All traffic stops and WS-24-400A becomes inaccessible
-
zrob_12 - Member
- Posts: 59
- Joined: Wed Mar 25, 2015 1:51 pm
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: All traffic stops and WS-24-400A becomes inaccessible
Anything is possible, can not hurt to do the following:
1) Upgrade to v1.3.9tc14 - I do not think this will solve it but it is needed to be sure
2) Cold reboot but this is not something that is indicative to something a cold reboot will fix.
3) Swap with spare switch to be sure this is not a bad unit.
Beyond that you need to do some digging.
1) Upgrade to v1.3.9tc14 - I do not think this will solve it but it is needed to be sure
2) Cold reboot but this is not something that is indicative to something a cold reboot will fix.
3) Swap with spare switch to be sure this is not a bad unit.
Beyond that you need to do some digging.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
zrob_12 - Member
- Posts: 59
- Joined: Wed Mar 25, 2015 1:51 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: All traffic stops and WS-24-400A becomes inaccessible
Just sent you log via PM...
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: All traffic stops and WS-24-400A becomes inaccessible
Please try the v1.3.9rc14 just to be sure.
Yea I got your PM, I will try and pars through it tomorrow, seems awfully long for a log.
Yea I got your PM, I will try and pars through it tomorrow, seems awfully long for a log.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
zrob_12 - Member
- Posts: 59
- Joined: Wed Mar 25, 2015 1:51 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: All traffic stops and WS-24-400A becomes inaccessible
Thanks Chris. I will upgrade the firmware tomorrow when I can be onsite. I will keep you posted.
-
zrob_12 - Member
- Posts: 59
- Joined: Wed Mar 25, 2015 1:51 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: All traffic stops and WS-24-400A becomes inaccessible
Firmware upgrade went smooth and may have led me to the potential culprit. Upon loading of the new firmware, Port1 produced an error message and would not power up the connected AF24. I unplugged the device and turned the port back on. When the device was plugged in, an outage occurred...unplug it and things returned to normal.
That being said, I believe that could be the issue as an outage has not occurred since being unplugged. Anyone else witnessed this before? Other thoughts?
That being said, I believe that could be the issue as an outage has not occurred since being unplugged. Anyone else witnessed this before? Other thoughts?
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: All traffic stops and WS-24-400A becomes inaccessible
zrob_12 wrote:Firmware upgrade went smooth and may have led me to the potential culprit. Upon loading of the new firmware, Port1 produced an error message and would not power up the connected AF24. I unplugged the device and turned the port back on. When the device was plugged in, an outage occurred...unplug it and things returned to normal.
That being said, I believe that could be the issue as an outage has not occurred since being unplugged. Anyone else witnessed this before? Other thoughts?
You need to be a little more descriptive.
What error message?
What is plugged in there?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
zrob_12 - Member
- Posts: 59
- Joined: Wed Mar 25, 2015 1:51 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: All traffic stops and WS-24-400A becomes inaccessible
Log showed this:
Dec 31 18:00:45 switch[970]: !Port 1 has link, disabling PoE
AirFiber24 powered via 48VH
Dec 31 18:00:45 switch[970]: !Port 1 has link, disabling PoE
AirFiber24 powered via 48VH
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: All traffic stops and WS-24-400A becomes inaccessible
zrob_12 wrote:Log showed this:
Dec 31 18:00:45 switch[970]: !Port 1 has link, disabling PoE
AirFiber24 powered via 48VH
Maybe provide a few lines before and after the event.
You did upgrade this right and what version were you upgrading from?
There was a bug SEVERAL versions ago where the first POE port would be disabled on reboot but that was many versions ago like v1.3.3 and v1.3.5
viewtopic.php?f=17&t=240&start=70#p7821
After upgrading to v1.3.8 and or preferably v1.3.9rc15 and a reboot and that is fixed.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
zrob_12 - Member
- Posts: 59
- Joined: Wed Mar 25, 2015 1:51 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: All traffic stops and WS-24-400A becomes inaccessible
Just PM'd you the log.
Upgrading from 1.3.8
Let me know when you get a few minutes to check out that log and the other log I emailed you yesterday : )
Upgrading from 1.3.8
Let me know when you get a few minutes to check out that log and the other log I emailed you yesterday : )
Who is online
Users browsing this forum: No registered users and 20 guests