1.3.7 - Odd Packet Loss Issue
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: 1.3.7 - Odd Packet Loss Issue
Chris,
Something absolutely changed between 1.3.4/5 and 1.3.8. And it appears to be related to Flow Control / Pause Frames.
On 1.3.4 traffic flows normally on the switches, pause frames increment, but nothing else big happens. On 1.3.8 the same happens but there are noticeable pauses in network traffic (like where pings will timeout for one or two pings) and then traffic resumes as normal.
Disabling Flow Control on the ports on both sides of the airFiber24 link resolved the issue, but of course flow control is now not on.
Rolling the switch back to 1.3.4 the issue goes away. Roll the switch to 1.3.8 and the packet loss starts happening.
Something absolutely changed between 1.3.4/5 and 1.3.8. And it appears to be related to Flow Control / Pause Frames.
On 1.3.4 traffic flows normally on the switches, pause frames increment, but nothing else big happens. On 1.3.8 the same happens but there are noticeable pauses in network traffic (like where pings will timeout for one or two pings) and then traffic resumes as normal.
Disabling Flow Control on the ports on both sides of the airFiber24 link resolved the issue, but of course flow control is now not on.
Rolling the switch back to 1.3.4 the issue goes away. Roll the switch to 1.3.8 and the packet loss starts happening.
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 1.3.7 - Odd Packet Loss Issue
Not sure what to tell you Matt, there were no changes to Flow control or switching between those versions.
Keep digging, you have to be missing something?
mhoppes wrote:It was very coincidental.... but had nothing to do with the firmware upgrades.... That's why I updated the thread! Didn't want to keep a panic going!
Keep digging, you have to be missing something?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: 1.3.7 - Odd Packet Loss Issue
I believe you, Chris... but I can sit here all day (and I have) and duplicate this.
Downgrade to 1.3.4 - Issue goes away
Upgrade to 1.3.8 - packet loss
Turn off flow control in 1.3.8 and packet loss goes away.
Downgrade to 1.3.4 - Issue goes away
Upgrade to 1.3.8 - packet loss
Turn off flow control in 1.3.8 and packet loss goes away.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: 1.3.7 - Odd Packet Loss Issue
sirhc wrote:Not sure what to tell you Matt, there were no changes to Flow control or switching between those versions.mhoppes wrote:It was very coincidental.... but had nothing to do with the firmware upgrades.... That's why I updated the thread! Didn't want to keep a panic going!
Keep digging, you have to be missing something?
I'm updating the thread again. It seemed coincidental, but it turned out it wasn't.
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 1.3.7 - Odd Packet Loss Issue
v1.3.5 wrote:
FIXES
- Fixed flow control on dual SFP ports
v1.3.7 wrote:FIXES
- Fixed issue with RADIUS passwords that have special characters- Fixed flow control on quad SFP ports
Well prior to v1.3.5 Flow Control did not work on the SFP ports so maybe that is the issue?
Are you using SFP ports?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
nickwhite - Member
- Posts: 45
- Joined: Fri Jul 03, 2015 10:17 am
- Location: Austin, Texas
- Has thanked: 9 times
- Been thanked: 2 times
Re: 1.3.7 - Odd Packet Loss Issue
Out of curiosity, how was the RADWin radio causing packet loss between and EdgeRouter and directly connected Netonix?
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: 1.3.7 - Odd Packet Loss Issue
If you are using SFP ports then try changing them from 1G to Auto but be careful as this may cause you to lose control depending on the SFP module as some modules require 1G and not Auto and some modules require Auto and sometimes it require the other device connected to be changed to match up.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mhoppes - Associate
- Posts: 664
- Joined: Thu Apr 10, 2014 9:14 pm
- Location: Pennsylvania
- Has thanked: 10 times
- Been thanked: 125 times
Re: 1.3.7 - Odd Packet Loss Issue
No SFPs, these are all the copper ports.
So the RADWin issue - and why I thought this was coincidence.
We were having packet loss on one leg of Internet. Could not for the life of me figure out why we couldn't get more than about 95megabits through and why there was packet loss. THAT issue was several compound things.
After upgrading the Netonix, FC apparently worked with the EdgeRouter-Lite that's wired into it? At that point the EdgeRouter-Lite was actually trying to push more data through the network, but we discovered there was a RADWin chained at a site and these radios only have 100meg ports.
Gigabit Radio Ethernet--->RADWin Ethernet--->RADWin Ethernet--->Switch
So basically, the RADWin Ethernet port was limited the Gigabit radio causing packet loss. After that issue was resolved I thought that was the cause of the packet loss... but after more testing this past week, it turns out there were several things going on.
So the RADWin issue - and why I thought this was coincidence.
We were having packet loss on one leg of Internet. Could not for the life of me figure out why we couldn't get more than about 95megabits through and why there was packet loss. THAT issue was several compound things.
After upgrading the Netonix, FC apparently worked with the EdgeRouter-Lite that's wired into it? At that point the EdgeRouter-Lite was actually trying to push more data through the network, but we discovered there was a RADWin chained at a site and these radios only have 100meg ports.
Gigabit Radio Ethernet--->RADWin Ethernet--->RADWin Ethernet--->Switch
So basically, the RADWin Ethernet port was limited the Gigabit radio causing packet loss. After that issue was resolved I thought that was the cause of the packet loss... but after more testing this past week, it turns out there were several things going on.
Who is online
Users browsing this forum: No registered users and 26 guests