SFP/Fiber Link Setting

DOWNLOAD THE LATEST FIRMWARE HERE
Post a reply
User avatar
lligetfa
Associate
Associate
 
Posts: 1191
Joined: Sun Aug 03, 2014 12:12 pm
Location: Fort Frances Ont. Canada
Has thanked: 307 times
Been thanked: 381 times

Re: SFP/Fiber Link Setting

Mon Feb 08, 2016 2:09 pm

sakita wrote:Interestingly, I noticed that one of the switches was running 100Mb with the SFP port set to 1G... I changed it to Auto and hit apply. The switch lost connection and never came back. It will be receiving a field visit shortly...

Good thing you did it today as per your sig. There's no saying what would have happened if you did that tomorrow. :idea:
Top
User avatar
sirhc
Employee
Employee
 
Posts: 7416
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: SFP/Fiber Link Setting

Mon Feb 08, 2016 2:17 pm

I have informed Eric of the BUG with IE10 and should be fixed in next release, sorry.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Top
User avatar
sakita
Experienced Member
 
Posts: 206
Joined: Mon Aug 17, 2015 2:44 pm
Location: Arizona, USA
Has thanked: 93 times
Been thanked: 80 times

Re: SFP/Fiber Link Setting

Mon Feb 08, 2016 3:22 pm

...power cycle restored communications but also restored the port 13 setting to 1G.

So, I now have two WS-12-250DC switches (Board Rev D, firmware 1.3.9 running 100Mb Avago SFPs (AFCT-5765ATPZ) with one happy with "Auto" and the other happy with "1G" for the port speed. It works so I'll just leave it along but it is strange...

...back to the original poster: you can run 100Mb fiber but it could get interesting.
Today is an average day: Worse than yesterday, but better than tomorrow.
Top
User avatar
sirhc
Employee
Employee
 
Posts: 7416
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: SFP/Fiber Link Setting

Mon Feb 08, 2016 3:27 pm

Yea, it all depends on the SFP module. Some work with Auto and some with 1G and some both.

I just took 2 SFP modules OUT OF SERVICE as they would work with both settings but if I changed from 1 to the other setting I had to reboot the switch to get them to link back up.

If you have an SFP module like that I would look at replacing it when you can.

It is OK if it only works with 1 setting but if you can not switch back and forth and get the link back without rebooting the switch I would get rid of that SFP module - I DID.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Top
User avatar
sakita
Experienced Member
 
Posts: 206
Joined: Mon Aug 17, 2015 2:44 pm
Location: Arizona, USA
Has thanked: 93 times
Been thanked: 80 times

Re: SFP/Fiber Link Setting

Mon Feb 08, 2016 3:36 pm

So it is an individual SFP thing and not a brand / model thing? These are both the same SFP make / model.

Kind of like people, worry about the individual not what groups they belong to...
Today is an average day: Worse than yesterday, but better than tomorrow.
Top
User avatar
sirhc
Employee
Employee
 
Posts: 7416
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: SFP/Fiber Link Setting

Mon Feb 08, 2016 3:47 pm

sakita wrote:So it is an individual SFP thing and not a brand / model thing? These are both the same SFP make / model.

Kind of like people, worry about the individual not what groups they belong to...


Well, I have found when you buy the OFF brand SFP modules (and we do very often) they sometimes vary from unit to unit.

When we do buy the several hundred dollar Cisco brands they are always the same.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Top
Previous
Post a reply
Return to Hardware and software issues

Who is online

Users browsing this forum: No registered users and 73 guests