My first switch arrived a few days ago. Very pleased, but pretty sure I have an issue with one port...
-Unifi AP plugged into port 5 = All okay.
-Cable test on empty port 6 = open, open,open, open, all 0ft
-Unifi moved from Port 5 to 6. Can no longer ping. Powers up okay, but is 'isolated'. Green 24V, 2.9W Tx data 0B Rx data 300kB
-Cable test on port 6 with Unifi in place ok,ok,short,short, all 1m.
MAC Address ec:13:b2:91:0b:88
IP Address 192.168.1.222
Firmware Version 1.3.9
Board Rev B
Problem with port
- simon1
- Member
- Posts: 16
- Joined: Mon Mar 28, 2016 1:12 pm
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Problem with port
First I moved you post to a more appropriate place as you put your post in the RMA thread.
Please post up screen grabs of your config Tabs.
If you have Teamviewer version 11 I will be happy to Team View in and see what is up.
Have your computer connected to the switch in question.
Please post up screen grabs of your config Tabs.
If you have Teamviewer version 11 I will be happy to Team View in and see what is up.
Have your computer connected to the switch in question.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- simon1
- Member
- Posts: 16
- Joined: Mon Mar 28, 2016 1:12 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: Problem with port
Real noob question - how do I post an image? (other than pointing to a URl)
Teamview upgrading to V11 free version...
Teamview upgrading to V11 free version...
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Problem with port
simon1 wrote:Real noob question - how do I post an image? (other than pointing to a URl)
Teamview upgrading to V11 free version...
Scroll down below input box where you are typing your message and click upload attachment then browse to file, then place cursor in edit box where you want picture then click insert
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- simon1
- Member
- Posts: 16
- Joined: Mon Mar 28, 2016 1:12 pm
- Has thanked: 0 time
- Been thanked: 0 time
- simon1
- Member
- Posts: 16
- Joined: Mon Mar 28, 2016 1:12 pm
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Problem with port
If you turn the POE off on port 6 and then try to connect to the switch with say your laptop do you get a link?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- simon1
- Member
- Posts: 16
- Joined: Mon Mar 28, 2016 1:12 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: Problem with port
1G connectivity, no flow control, still 0 bytes Tx packets/data.
Different cable used
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Problem with port
I am not sure I follow you
If you turn POE off on port 6 and plug your laptop in are you getting a 1G connection and can you communicate with your network?
If you turn POE off on port 6 and plug your laptop in are you getting a 1G connection and can you communicate with your network?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- simon1
- Member
- Posts: 16
- Joined: Mon Mar 28, 2016 1:12 pm
- Has thanked: 0 time
- Been thanked: 0 time
Re: Problem with port
laptop plugged in shows 1G as per screenshot, but *no* connection through that link. Had to enable wireles to grab the screenshot from device web page
Who is online
Users browsing this forum: No registered users and 83 guests