v1.4.0rc1-16 Bug reports and comments

[sirhc]

I do not believe we changed the temp threshold between v1.3.9 and v1.4.0.

Your board is running at 53C which would ask the fan to be running at almost max speed.

What is the room temperature where this is installed?

You could always downgrade to v1.3.9 and see what it does and reports then.

[IntL-Daniel]

This is in the container on the roof of the tower building with aircon..normally there is about 20 degrees (celsius)...the only way is that the aircon does not work today and "probably" the higher RPM was already before the upgrade...and I did not noticed.

[sirhc]

This is in the container on the roof of the tower building with aircon..normally there is about 20 degrees (celsius)...the only way is that the aircon does not work today and "probably" the higher RPM was already before the upgrade...and I did not noticed.

Well if your switch board is 53C I would guess the switch is setting in an environment that is +/- 30C, I would go check it out.

[IntL-Daniel]

and if yes...what temp the board will survive?

[IntL-Daniel]

a few minutes later...board temp still the same

[sirhc]

The switch will run in 55C environment (presumably not inside a "super" small box with no ventilation or air volume) but like "any" electronics the warmer you run it the shorter the lifespan.

[IntL-Daniel]

I will go there to check the aircon asap...

[danield]

Accented characters are not displayed properly (can't post a screenshot here...)
The html encioding is set to the default which is here windows-1252 when it looks to me it should be set to utf-8
My guess is that if you add to the header

<meta
http-equiv
="content-type" content
="text/html; charset=utf-8" /
>



the problem wil be solved




Daniel

[sirhc]

v1.4.0rc10 released.
Please read release notes in post #1 of this thread or from the Download post and as always use it carefully as it is a Release Candidate.
PLEASE TRY THIS ON NON CRITICAL SWITCHES FIRST BEFORE YOU ROLL OUT AND REPORT BACK.

[designweb]

WS24-400A 1.4.0rc9
Board Rev B
been in service over a year

running four AF24, 1 is HD, 1 Mimosa, 1 48v Unifi Total 217W

In config turn on Discovery and LLDP lost power to AF24s, switch rebooted, turned off Discovery and LLDP same result
tried other config changes and different AF ports randomly showed over current load and switch rebooted. Maybe related to 1.4.0rc9



Apr 9 02:17:57 UI: Discovery_LLDP: changed from 'Enabled' to 'Disabled'

Apr 9 02:17:57 UI: Options_Discovery: changed from 'Enabled' to 'Disabled'

Apr 9 02:18:08 switch[3629]: Detected cold boot

Apr 9 02:18:09 kernel: link state changed to 'down' on port 12

Apr 9 02:18:09 kernel: link state changed to 'down' on port 5

Apr 9 02:18:09 kernel: link state changed to 'down' on port 4

Apr 9 02:18:09 kernel: link state changed to 'down' on port 6

Apr 9 02:18:09 kernel: link state changed to 'down' on port 1

Apr 9 02:18:09 kernel: link state changed to 'down' on port 2

Apr 9 02:18:09 kernel: link state changed to 'down' on port 3

Apr 9 02:18:12 kernel: link state changed to 'up' on port 11

Apr 9 02:18:13 kernel: link state changed to 'up' on port 6

Apr 9 02:18:13 kernel: link state changed to 'up' on port 12

Apr 9 02:18:14 kernel: link state changed to 'up' on port 5

Apr 9 02:18:18 kernel: link state changed to 'down' on port 11

Apr 9 02:18:18 kernel: link state changed to 'down' on port 6

Apr 9 02:18:19 kernel: link state changed to 'up' on port 11

Apr 9 02:18:20 kernel: link state changed to 'up' on port 6

Apr 9 02:18:36 kernel: link state changed to 'down' on port 11

Apr 9 02:18:36 kernel: link state changed to 'down' on port 6

Apr 9 02:18:38 kernel: link state changed to 'up' on port 11

Apr 9 02:18:39 kernel: link state changed to 'up' on port 6

Apr 9 02:18:43 kernel: link state changed to 'down' on port 12

Apr 9 02:18:54 kernel: link state changed to 'up' on port 12

Apr 9 02:18:58 kernel: link state changed to 'down' on port 5

Apr 9 02:19:00 kernel: link state changed to 'up' on port 5

Apr 9 02:19:10 kernel: link state changed to 'up' on port 1

Apr 9 02:19:10 kernel: link state changed to 'up' on port 2

Apr 9 02:19:10 kernel: link state changed to 'up' on port 4

Apr 9 02:19:12 kernel: link state changed to 'up' on port 3

Apr 9 02:19:42 kernel: link state changed to 'down' on port 3

Apr 9 02:19:42 kernel: link state changed to 'down' on port 1

Apr 9 02:19:42 kernel: link state changed to 'down' on port 2

Apr 9 02:19:42 kernel: link state changed to 'down' on port 4

Apr 9 02:19:44 kernel: link state changed to 'up' on port 3

Apr 9 02:19:44 kernel: link state changed to 'up' on port 1

Apr 9 02:19:44 kernel: link state changed to 'up' on port 2

Apr 9 02:19:45 kernel: link state changed to 'up' on port 4