I would want to know what this unknown traffic is hitting the switch just before it locks up?
What is the traffic, where is it coming from.
Obviously the switch does not like whatever it is and eventually it breaks the switch.
So even if we figure out what type of traffic it is and somehow make our switch immune to it all that is doing is putting lipstick on it, do you really not want to find out what and where it is coming from?
Dropping ports on new WS, what is wrong with my setup?
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Dropping ports on new WS, what is wrong with my setup?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: Dropping ports on new WS, what is wrong with my setup?
I've been using netonix's for a while and haven't had issues like this until now. Different situation than Adairs, but we are also getting the 8mbps at 16kpps taking down switches and flopping ports, etc.
I get it, you have thousands of switches deployed, and they are fine, we are not coming here saying your product is bad. We are just saying we are having issues (my fault, your fault, someone elses fault who cares) that we need help diagnosing as we have tried addressing them on our own internally and nothing is making any changes or sense here, so that is why we reach out to you.
I get it, you have thousands of switches deployed, and they are fine, we are not coming here saying your product is bad. We are just saying we are having issues (my fault, your fault, someone elses fault who cares) that we need help diagnosing as we have tried addressing them on our own internally and nothing is making any changes or sense here, so that is why we reach out to you.
Last edited by TheHox on Wed Apr 27, 2016 2:03 pm, edited 1 time in total.
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: Dropping ports on new WS, what is wrong with my setup?
So far the only thing I can see that is similar, is that we are all using multiple switches. No idea what that has to do, but I had 2 switches in line and had issues, adair has 2 switches in line and has issues.
I moved my switches to my router and the issue stopped.
I added another switch down stream again, and the problem came back again.
'shrug'
I have that port disabled for now.
I moved my switches to my router and the issue stopped.
I added another switch down stream again, and the problem came back again.
'shrug'
I have that port disabled for now.
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: Dropping ports on new WS, what is wrong with my setup?
Has anyone noticed if the CPU usage goes up a lot on the status page when this happens??
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: Dropping ports on new WS, what is wrong with my setup?
I don't think I have paid attention to that page when it happens, that is if I am even able to get to the switch.
I will try and look for that when it happens again.
I will try and look for that when it happens again.
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Dropping ports on new WS, what is wrong with my setup?
TheHox wrote:I don't think I have paid attention to that page when it happens, that is if I am even able to get to the switch.
I will try and look for that when it happens again.
You're going to try v1.4.0rc12 and let us know or wait a day or so for v1.4.0rc?? right?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
TheHox - Experienced Member
- Posts: 107
- Joined: Sat Sep 13, 2014 10:59 am
- Location: WI
- Has thanked: 11 times
- Been thanked: 18 times
Re: Dropping ports on new WS, what is wrong with my setup?
I'm playing with fire, I'm still running 1.3.9.
I think I've re arranged my network in that whatever was triggering the issues has gone away, we'll see.
Uptime 1 day 02:11:27
I want to see if it does it again with my current setup on 1.3.9, if it does, then I know it still persists and then I will test 1.4.0rc12.
I think I've re arranged my network in that whatever was triggering the issues has gone away, we'll see.
Uptime 1 day 02:11:27
I want to see if it does it again with my current setup on 1.3.9, if it does, then I know it still persists and then I will test 1.4.0rc12.
-
nickwhite - Member
- Posts: 45
- Joined: Fri Jul 03, 2015 10:17 am
- Location: Austin, Texas
- Has thanked: 9 times
- Been thanked: 2 times
Re: Dropping ports on new WS, what is wrong with my setup?
Wow, so this thread just blew my mind. Glad to know I'm not crazy.
Chiming in to state that we've been seeing this same issue:
- ports/switches stop passing
- Interfaces (usually connected to AF24 or AF5) show a constant 8mbps or 15Mbps of traffic on RX
- Weird issues related with RSTP
I've been battling this off and on for at least 3 months. I thought it was an issue with our network, maybe a loop somewhere that squeaked through. But no... we know what loops look like and these aren't them. For a while I thought it was something with UBNT - primarily saw this on AF5 links. Our network has probably in the neighborhood of 50-60 Netonix switches. A handful of toughswitches still in the mix too. A total of around 90 POPs.
I'll post more details shortly... it's been a long weekend.
Chiming in to state that we've been seeing this same issue:
- ports/switches stop passing
- Interfaces (usually connected to AF24 or AF5) show a constant 8mbps or 15Mbps of traffic on RX
- Weird issues related with RSTP
I've been battling this off and on for at least 3 months. I thought it was an issue with our network, maybe a loop somewhere that squeaked through. But no... we know what loops look like and these aren't them. For a while I thought it was something with UBNT - primarily saw this on AF5 links. Our network has probably in the neighborhood of 50-60 Netonix switches. A handful of toughswitches still in the mix too. A total of around 90 POPs.
I'll post more details shortly... it's been a long weekend.
-
nickwhite - Member
- Posts: 45
- Joined: Fri Jul 03, 2015 10:17 am
- Location: Austin, Texas
- Has thanked: 9 times
- Been thanked: 2 times
Re: Dropping ports on new WS, what is wrong with my setup?
Dave wrote:Has anyone noticed if the CPU usage goes up a lot on the status page when this happens??
From what I recall, no the CPU was not running high. I'll try and take note the next time I see this.
-
adairw - Associate
- Posts: 465
- Joined: Wed Nov 05, 2014 11:47 pm
- Location: Amarillo, TX
- Has thanked: 98 times
- Been thanked: 132 times
Re: Dropping ports on new WS, what is wrong with my setup?
Some updates.
We replaced the netonix switch at our Morton site and it still locked up. In fact we had more lock ups than we've ever had. All switches running 1.4.0rc12
I went through and disabled all un needed services on all the switches in this chain and it still locked up.
The customer traffic for our sites normally comes in via a mikrotik router and vpls tunnel. Using VLANS to get out of the router and in to the switch. In desperation I reconfigured all the switches to just use VLAN's between each other and so far there hasn't been a crash in 34 hours. I'm gonna let this run for a few days and see what happens.
The mikrotik routers are still there, but they are only running the management traffic.
We replaced the netonix switch at our Morton site and it still locked up. In fact we had more lock ups than we've ever had. All switches running 1.4.0rc12
I went through and disabled all un needed services on all the switches in this chain and it still locked up.
The customer traffic for our sites normally comes in via a mikrotik router and vpls tunnel. Using VLANS to get out of the router and in to the switch. In desperation I reconfigured all the switches to just use VLAN's between each other and so far there hasn't been a crash in 34 hours. I'm gonna let this run for a few days and see what happens.
The mikrotik routers are still there, but they are only running the management traffic.
Who is online
Users browsing this forum: No registered users and 17 guests