v1.4.0rc19 - rc25 Bug Reports and Comments

[sirhc]

Please post comments and reports bugs with v1.4.0rc19 - rc25 in this thread

We always suggest trying RC Versions on easy to access switches or better yet in lab environments first to insure they work for you.

We NEED to finalize v1.4.0 by the end of the week so PLEASE test and report back ASAP. Now is the time to find a bug to get it repaired and in the FINAL release.

But since the new models and Board Revs REQUIRE v1.4.0 we have to finalize it by end of week.

If you are running v1.4.0rcX or have a SMART DC switch model we HIGHLY recommend you upgrade to this version as soon as possible.

FIXED
- Fixed SNMP reported uptime - rc2
- Fixed rare problem with mac table not loading - rc3
- Fixed small UI issues with Firefox and IE - rc3
- Fixed SNMP CPU counters - rc4
- Fixed SNMP firmware version string - rc4
- Fixed so log messages now used VLAN ID instead of index - rc4
- Fixed RADIUS to work with SSH- rc9
- Fixed port not being in VLAN Bug- rc9
- Fixed pps being included in totals when port was excluded- rc9
- Fixed false fan failure detection *we hope*- rc9
- Fixed cleared log to indicate who cleared it- rc9
- Fixed so no duplicate VLAN ID allowed- rc9
- Fixed SSH session ending messages so not reported by dropbear- rc9
- Fixed Firefox autocomplete (workaround) - rc10
- Fixed language encoding - rc10
- Fixed console in UI - rc10
- Fixed graphs on Status Tab - rc11
- Fixed some incorrect voltage readings/alerts - rc11
- Fixed some more I2C communications problems mostly for SMART DC models. - rc12
- Fixed RSTP path cost now able to set to 1 - rc12
- Fixed Memory leak - rc16
- Fixed False fan alerts - rc16
- Fixed more I2C communications problems all models - rc16
- Fixed Ping and Traceroute if you have Spanish language selected - rc19
- Fixed log messages to not report successful logins (dropbear) - rc19
- Fixed fan speeds accidently increased in rc16 - rc19
- Fixed 10MB led - rc19
- Fixed IGMP Snooping issue - rc22
- Fixed Discovery sending packets to ports without links - rc22
- Fixed utility packets using Tx Q1 instead of Q0 - rc22

ENHANCEMENTS
- Increased MAX allowed DC input voltage for WS-8-250-DC and WS-12-250-DC to 61.5V for off grid solar sites - rc2
- IMPROVED SMART DC switches I2C communication- rc9
- Added HTTP Port to be changed- rc9
- Added telnet for CLI access- rc9
- Added Discovery to Tools menu- rc9
- Added multiple languages support- rc9
- Added VLAN information to SNMP- rc9
- Added Revert Timer Help Balloon- rc9
- Added total power consumption to SNMP- rc9
- Added DC input voltage graph on the Device/Status Tab- rc9
- Added tooltips to buttons- rc9
- Added increased SMTP Username length- rc9
- Added Power tab on all models for time conditions- rc9
- Change ifDescr and ifAlias- rc9
- Time Condition graphic on Christmas tree rc10
- Added To line to email header rc10
- Added more graphs for SMART DC models under Device/Status Tab - rc11
- Added an Enable/Disable check box for TFTP backup - rc11
- Reduced CPU usage - rc12
- Greatly improved the Discovery Tab (You must enable Discovery on the Device/Configuration Tab for this to work) - rc19
- Added workaround for Flow Control Pause Frame floods - rc19
- Removed workaround for Flow Control Pause Frame Packet because of False Positives - rc22
- Added Flow Control Pause Frame Protection - rc25
- Added the ability to configure Flow Control Obey/Generate/Both per port - rc25

KNOWN ISSUES
- Discovery does not discover uniFi and airCAM products - will be fixed in next release

rc25 Released 5/17/2016 - If your running v1.4.0rcX or have a SMART DC Switch I recommend upgrading
rc22 Released 5/13/2016
rc19 Released 5/10/2016
rc16 Released 5/3/2016
rc12 Released 4/14/2016
rc11 Released 4/12/2016
rc10 Released 4/08/2016
rc9 Released 4/05/2016
rc4 Released 2/29/2016
rc3 Released 2/11/2016
rc2 Released 2/06/2016

[sirhc]

Is anybody trying this new version out, it has to go final end of this week?

[lligetfa]

I installed it on a WS-6 and a WS-24 with no drama.

I did get an email alert when a UVC rebooted. These cams tend to wake up in TFTP mode (10 mbps, no DHCP) for a few seconds until the boot completes and then negotiates 100 meg.

[Mikea]

We have upgraded our WS-12-250-AC to v1.4.0rc19 F/W.

I ve notice (the first day of stats collection)
Pros:
1) Less memory usage

Cons
1)There is some not before recorded traffic on Powered off ports that it is about 1packet every 5-10sec. (attached screens)
This maybe it is normal but since i ve noticed after this update i think that it must be noted.

[sirhc]

That maybe the new Discovery sending out those packets? I sent a Skype to Eric.

[Eric Stern]

There is some not before recorded traffic on Powered off ports that it is about 1packet every 5-10sec. (attached screens)
This maybe it is normal but since i ve noticed after this update i think that it must be noted.

It is our new Discovery routine looking for devices, it'll be fixed in the next release.

[Mikea]

Thank you, since it is discovery packets and at that rate it isn't an urgent issue :)

[sirhc]

Thanks to Yahel's post we took another look at our KLUDGE FIX which we are going to remove.

First off there was a BUG that if you cleared the port stats it could cause the KLUDGE FIX to falsely disable FC if there was already 10K or more legit pause frames.

I removed v1.4.0rc19 from download and will post up v1.4.0rc2X with the KLUDGE FIX REMOVED later today and some other minor fixes.

[sirhc]

v1.4.0rc22 is being released

We had added a KLUDGE FIX in v1.4.0rc19 to detect the Pause Frame Storm and automatically disable FC on that port but there was a bug in it which could lead to false detections so we decided to remove it. If you have rc19 installed we suggest you install rc22.

Remember if you encounter the Pause Frame issue with airFIBER radios you need to disable Flow Control on the airFIBER or the switch port that connects to the airFIBER.

[designweb]

thanks for the ongoing improvements as ever, nothing major to report, I now have rc22 running on many various switches, ntp seems to take over an hour to update, whereas earlier versions time was correct as it came back up. Discovery used to show many devices Ubnt and Netonix on same vlan, now only seem to see netonix on lldp connected directly to its ports or via radio link.

these first four ports are AF24 and AF24D and uptime now six hours overnight but all still running flow conrol, 5 which is connected to a mimosa with old extremeware switch at far end fc on but not established and 6 is AC ubnt talking to toughswitch fc running.
as you can see a few errors on AF24 ports but only while upgrades done on Netonix at othe end, no further errors






1
xxx-sw2
1G



48VH

48.3

20.20 GB

2.35 GB

16M

9M

14



2
xxx-sw1
1G

48VH

50.2

22.36 GB
2.40 GB
19M
12M
10



3
xxxx-sw1
1G

48VH

28.1

24.63 GB
229.23 GB
115M
187M
12



4
xxxxx-sw1
1G

48VH

38.4

122.69 GB
14.34 GB
101M
59M
13



5
xx-sw1
1G

48V

11.5

9.65 GB
1.10 GB
9M
6M
0



6
xxx-sw1
1G

24V

2.9

5.48 GB
402.48 MB
5M
2M
0