The issue presents as an effect where upon saving the Ligo's port to run 48V the entire switch goes off, lights fans everything with the only apparent way to revive it is to off/on the dc supply.
Having an extra DC switch and an extra ligo with me I was able to extensively test without dropping 100+ clients repeatedly, I was initially convinced it was a bad cable and the cable test function did little to improve that notion. Cable test claimed I had perfectly good 260 foot cable, the radio is hung at 40 feet
, I tested the spare which was on a 15 foot patch cord, it was also declared to be a good 260 foot connection. Clearly something was interacting between the switch and the 802.3at in the Ligo.Turn off POE Smart and the problem goes away, tested the uptower and ground level units on the spare switch with success and then hit the uptower unit on the production switch, all is well.
