Hi,
Is there any plans to support BiDirectional SFP's?
We have tried a few but they don't seem to work, the model we have been using is this: TL-SM321A,
Has anyone else had any luck?
Thanks
Mike
TL-SM321A Support
-
MichaelBrandl - Member
- Posts: 29
- Joined: Mon Sep 21, 2015 11:15 am
- Location: Hampshire, UK
- Has thanked: 4 times
- Been thanked: 2 times
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
Re: TL-SM321A Support
I have both Mikrotik S-53LC20D/S-35LC20D and Fiberstore SFP-GE-BX BiDi modules in my lab and they work fine. Make sure you are using the latest firmware.
-
mike99 - Associate
- Posts: 837
- Joined: Tue Nov 25, 2014 10:53 am
- Location: Quebec, Canada
- Has thanked: 95 times
- Been thanked: 245 times
Re: TL-SM321A Support
We also have Maxxwave on production with WS-12-250-AC and they work fine.
http://www.balticnetworks.com/maxxwave- ... -3122.html
Don't forget to try both rate (forced to 1G and auto) and be sure to have MTU higher than 1500 or 1504 (not sure anymore about older default MTU on old firmware). On those older firmware, MTU was too low in some case for SFP ports. The default is now 1528 if I remeber well.
http://www.balticnetworks.com/maxxwave- ... -3122.html
Don't forget to try both rate (forced to 1G and auto) and be sure to have MTU higher than 1500 or 1504 (not sure anymore about older default MTU on old firmware). On those older firmware, MTU was too low in some case for SFP ports. The default is now 1528 if I remeber well.
-
MichaelBrandl - Member
- Posts: 29
- Joined: Mon Sep 21, 2015 11:15 am
- Location: Hampshire, UK
- Has thanked: 4 times
- Been thanked: 2 times
Re: TL-SM321A Support
Thanks Both,
I'll try upgrading a couple to the latest and failing that get the Mikrotik SFP's!
Thanks
Mike
I'll try upgrading a couple to the latest and failing that get the Mikrotik SFP's!
Thanks
Mike
-
Dawizman - Experienced Member
- Posts: 141
- Joined: Fri Jul 03, 2015 4:11 pm
- Location: Cold Lake, AB - CANADA
- Has thanked: 15 times
- Been thanked: 22 times
Re: TL-SM321A Support
I have been using a TL-SM321A module in a WS-12-250-D for about 10 months now. I'm not sure what firmware version we started with, but this site is currently on 1.4.4.
5 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 5 guests