WS-12-250-DC - 1.4.6 Hibernation

[WisTech]

I had a hilltop nearly inaccessible during this past storm, so I scheduled ports to be disabled at specific thresholds, as well as setting the hibernation at 10.5v (switch reads 2 tenths lower than actual voltage) with a resume of 10.7v. I ran my quad up the hill today and checked voltage with a multimeter, and to my surprise, the batteries were at 11.88v, yet the switch was unresponsive until I removed the ground lead and re-connected. I'm running 1.4.6 across nearly 40 switches, and this is the first time I've ever had one go into hibernation.