TX drops across a vlan

DOWNLOAD THE LATEST FIRMWARE HERE
User avatar
scracha
Member
 
Posts: 53
Joined: Thu Sep 15, 2016 8:36 pm
Has thanked: 5 times
Been thanked: 5 times

TX drops across a vlan

Sun Jan 22, 2017 1:18 am

Hi,

My first site with a Netonix and I'm having issues with TX drops across Mikrotik VLAN. Screenshots below may explain it better. Really appreciate assistance to fix whatever I've done wrong as the drops are making latency and throughput lousy. Thanks

prob_tik.png

prob_tik2.png
prob_tik2.png (10.54 KiB) Viewed 3769 times


prob_netonix1.png

prob_netonix2.png

prob_netonix3.png

prob_netonix4.png

prob_netonix5.png
prob_netonix5.png (4.05 KiB) Viewed 3773 times

User avatar
sirhc
Employee
Employee
 
Posts: 7416
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: TX drops across a vlan

Sun Jan 22, 2017 1:27 am

Please add Screen Grab of Device/Status Tab
A crude Network drawing showing where each port goes or does

Figure out why ports 6 and 7 pm;y show 10M links???

Also screen grab of each port detail stats
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
scracha
Member
 
Posts: 53
Joined: Thu Sep 15, 2016 8:36 pm
Has thanked: 5 times
Been thanked: 5 times

Re: TX drops across a vlan

Sun Jan 22, 2017 6:28 pm

prob_site_diagram.png



Ports 6 & 7 have radios are up a huge pole next to FM gear with a total of just 5 customers combined. To quickly resolve intermittent port flapping I've locked them to 10Mbps. The West nanostation on that pole still get occasional port flapping but regardless, the issue seems to be across the VLAN. Other Radios on different pole and have been re-cabled.

On the plus side, the WISP switch has successfully stopped port flapping I was still getting on the NE Rocket M5 (cable tested, recabled twice, radio replaced etc then we ditched the Digital Loggers 24V POE switch).

Latency from our NOC to the airfiber on the site is steady <2ms. Latency to the Mikrotik is often <2ms but has large spikes to around 50ms. Have updated airfibre firmware from release to the beta. Have tried flow control off. Have tried forcing the airfibre port to 100Mbps full duplex. Airfibre signal good (-58dBm, solid 256QAM giving around 135Mbps/40Mbps at 75% upload/download ratio) but speed and latency at this site are awful.
Have RB3011 and Airfibre, Airprisms on other sites without similar issues but I'm not running VLANs and WISP switches on them yet so I've done something stupid here :hurray:

User avatar
sirhc
Employee
Employee
 
Posts: 7416
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: TX drops across a vlan

Sun Jan 22, 2017 11:10 pm

Please turn Flow Control OFF on the ports forced to 10M and possibly the AFX ports

I will look at it more tomorrow after Dentist appointment.

Would still like to see Port Details
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

User avatar
scracha
Member
 
Posts: 53
Joined: Thu Sep 15, 2016 8:36 pm
Has thanked: 5 times
Been thanked: 5 times

Re: TX drops across a vlan

Mon Jan 23, 2017 3:53 am

Hi SIRHC, thanks for your help. I'm not sure what more port details would you like to see? There's no TX or RX errors reported on the Mikrotik. As per previous diagram, bar one old trango radio and the customer router everything is through one port (7) on the Mikrotik router with vlan isolation. VLAN ID 202 is the Airfiber 5x backhaul. VLAN ID 203 is the reserve backhaul...etc etc.

I've disabled flow control on the netonix switch ports facing the AF5x and the two (north and south) nanostation m5's running at 10Mbps.

Also disabled flow control on the AF5x at the tower (as in the radio config).

prob_vlans.png


prob_tik_port_details.png

User avatar
scracha
Member
 
Posts: 53
Joined: Thu Sep 15, 2016 8:36 pm
Has thanked: 5 times
Been thanked: 5 times

Re: TX drops across a vlan

Mon Jan 23, 2017 4:12 pm

I had a good think about this last night and changed my google search! I think it's solved.

set
ether7-Netonix queue
=ethernet-default


ethernet-default queue type is pfifo but size is changed from 50 to 200.

I've re-enabled flow control and ran some btest/iperf tests. Performance miles better!

Only way I can find to reset vlan counters is to restart the mikrotik so I'll schedule that for the wee small hours.


http://forum.mikrotik.com/viewtopic.php?t=95975

Return to Hardware and software issues

Who is online

Users browsing this forum: Google [Bot] and 90 guests