Watchdog Failure every 3 hours, then Log/Uptime Reset

DOWNLOAD THE LATEST FIRMWARE HERE
jeremylu
Member
 
Posts: 13
Joined: Fri Jul 29, 2016 11:14 am
Has thanked: 0 time
Been thanked: 0 time

Watchdog Failure every 3 hours, then Log/Uptime Reset

Sun Mar 05, 2017 4:14 am

Just started happening yesterday morning at 8am, and then every 3 hours since.

Watchdog will fail, then will reboot port, when I checked the logs, it seemed they reset (Showing Dec 31, then proper date).

It has been every 3 hours for almost 24 hours straight, I'm not sure it is a problem with Netonix, just curious if this has happened to anyone else before.

User avatar
sirhc
Employee
Employee
 
Posts: 7416
Joined: Tue Apr 08, 2014 3:48 pm
Location: Lancaster, PA
Has thanked: 1608 times
Been thanked: 1325 times

Re: Watchdog Failure every 3 hours, then Log/Uptime Reset

Sun Mar 05, 2017 10:13 am

I do not follow what your describing/asking?

Start with Switch Model and firmware version.

Then explain what is going on in more detail.

I have no idea if you're saying the switch is rebooting or a watchdog rule is rebooting a device on a port?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.

jeremylu
Member
 
Posts: 13
Joined: Fri Jul 29, 2016 11:14 am
Has thanked: 0 time
Been thanked: 0 time

Re: Watchdog Failure every 3 hours, then Log/Uptime Reset

Sat May 27, 2017 4:00 am

This is happening again, and seems to be unrelated to the Netonix. I'm not sure why it went away in March, but this entire setup has been acting very strangely randomly.

Ubiquiti device going offline every 3 hours, requiring AP or SM reboot. Happening for over 5 days this time, I'm now using the watchdog in the Ubiquiti device instead of netonix to attempt to pinpoint the issue. Site is also mixing airMax M and AC units over a PTMP Backhaul system (1AP, 2 sites).

Is there ANYTHING that a Netonix might do every 3 hours that could cause any strangeness? I doubt it, but just have to ask so I've explored all possibilities. This system has a Netonix switch on each side, and one is using Untagged VLAN's to separate WAN and LAN networks on a Mikrotik it is powering.

5 days of banging my head against the wall, so I'm kind of grasping at straws.

Return to Hardware and software issues

Who is online

Users browsing this forum: No registered users and 62 guests