Hello, I have a WS-24-400A Switch that is rebooting randomly but many times a day, when it does it posts the following to the Log:
Dec 31 15:00:06 netonix: 1.4.6 on WS-24-400A
Dec 31 15:00:11 system: Setting MAC address from flash configuration: EC:13:B3:01:87:B0
Dec 31 15:00:13 system: starting ntpclient
Dec 31 15:00:14 admin: adding lan (eth0) to firewall zone lan
Dec 31 15:00:26 STP: set port 1 to discarding
Dec 31 15:00:26 STP: set port 2 to discarding
Dec 31 15:00:27 STP: set port 5 to discarding
Dec 31 15:00:27 STP: set port 6 to discarding
Dec 31 15:00:27 STP: set port 8 to discarding
Dec 31 15:00:27 STP: set port 9 to discarding
Dec 31 15:00:27 STP: set port 10 to discarding
Dec 31 15:00:27 STP: set port 11 to discarding
Dec 31 15:00:27 STP: set port 12 to discarding
Dec 31 15:00:27 STP: set port 19 to discarding
Dec 31 15:00:27 STP: set port 20 to discarding
Dec 31 15:00:30 STP: set port 20 to learning
Dec 31 15:00:30 STP: set port 20 to forwarding
Dec 31 15:00:30 STP: set port 19 to learning
Dec 31 15:00:30 STP: set port 19 to forwarding
Dec 31 15:00:30 STP: set port 12 to learning
Dec 31 15:00:30 STP: set port 12 to forwarding
Dec 31 15:00:30 STP: set port 11 to learning
Dec 31 15:00:30 STP: set port 11 to forwarding
Dec 31 15:00:30 STP: set port 10 to learning
Dec 31 15:00:30 STP: set port 10 to forwarding
Dec 31 15:00:30 dropbear[759]: Running in background
Dec 31 15:00:30 STP: set port 9 to learning
Dec 31 15:00:30 STP: set port 9 to forwarding
Dec 31 15:00:30 STP: set port 8 to learning
Dec 31 15:00:30 STP: set port 8 to forwarding
Dec 31 15:00:30 STP: set port 6 to learning
Dec 31 15:00:30 STP: set port 6 to forwarding
Dec 31 15:00:30 STP: set port 5 to learning
Dec 31 15:00:30 STP: set port 5 to forwarding
Dec 31 15:00:30 STP: set port 2 to learning
Dec 31 15:00:30 STP: set port 2 to forwarding
Dec 31 15:00:30 STP: set port 1 to learning
Dec 31 15:00:30 STP: set port 1 to forwarding
Dec 31 15:00:31 Port: link state changed to 'up' (1G) on port 23
Dec 31 15:00:31 STP: set port 23 to discarding
Dec 31 15:00:31 STP: set port 23 to learning
Dec 31 15:00:31 STP: set port 23 to forwarding
Dec 31 15:00:34 system: starting ntpclient
Jul 10 15:47:25 switch[826]: Detected cold boot
Jul 10 15:47:26 Port: link state changed to 'down' on port 6
Jul 10 15:47:26 STP: set port 6 to discarding
Jul 10 15:47:26 Port: link state changed to 'down' on port 8
Jul 10 15:47:26 STP: set port 8 to discarding
Jul 10 15:47:26 Port: link state changed to 'down' on port 10
Jul 10 15:47:26 STP: set port 10 to discarding
Jul 10 15:47:26 Port: link state changed to 'down' on port 11
Jul 10 15:47:26 STP: set port 11 to discarding
Jul 10 15:47:26 Port: link state changed to 'down' on port 12
Jul 10 15:47:26 STP: set port 12 to discarding
Jul 10 15:47:26 switch[826]: Port 2 has link while turning on PoE
Jul 10 15:47:26 switch[826]: PoE enabled on port 2, PoE Smart is starting cable check
Jul 10 15:47:26 switch[826]: Port 6 has link while turning on PoE
Jul 10 15:47:26 Port: link state changed to 'down' on port 2
Jul 10 15:47:26 STP: set port 2 to discarding
Jul 10 15:47:26 switch[826]: PoE enabled on port 6, PoE Smart is starting cable check
Jul 10 15:47:26 switch[826]: PoE enabled on port 8, PoE Smart is starting cable check
Jul 10 15:47:26 switch[826]: PoE enabled on port 10, PoE Smart is starting cable check
Jul 10 15:47:27 switch[826]: PoE enabled on port 11, PoE Smart is starting cable check
Jul 10 15:47:27 switch[826]: PoE enabled on port 12, PoE Smart is starting cable check
Jul 10 15:47:27 switch[826]: PoE enabled on port 14, PoE Smart is starting cable check
Jul 10 15:47:31 switch[826]: Port 2 cable check results: Open, Abnormal termination, Open, Open
Jul 10 15:47:31 switch[826]: Port 2 passed PoE Smart cable check, turning on power
Jul 10 15:47:31 switch[826]: Port 6 cable check results: Ok, Ok, Short, Short
Jul 10 15:47:31 switch[826]: Port 6 passed PoE Smart cable check, turning on power
Jul 10 15:47:31 switch[826]: Port 8 cable check results: Ok, Ok, Short, Short
Jul 10 15:47:31 switch[826]: Port 8 passed PoE Smart cable check, turning on power
Jul 10 15:47:31 switch[826]: Port 10 cable check results: Ok, Ok, Abnormal termination, Abnormal termination
Jul 10 15:47:31 switch[826]: Port 10 passed PoE Smart cable check, turning on power
Jul 10 15:47:31 switch[826]: Port 11 cable check results: Ok, Ok, Short, Short
Jul 10 15:47:31 switch[826]: Port 11 passed PoE Smart cable check, turning on power
Jul 10 15:47:31 switch[826]: Port 14 cable check results: Open, Open, Open, Open
Jul 10 15:47:31 switch[826]: Port 14 passed PoE Smart cable check, turning on power
Jul 10 15:47:32 switch[826]: Port 12 cable check results: Ok, Ok, Short, Short
Jul 10 15:47:32 switch[826]: Port 12 passed PoE Smart cable check, turning on power
Jul 10 15:47:34 Port: link state changed to 'up' (1G) on port 2
Jul 10 15:47:34 STP: set port 2 to discarding
Jul 10 15:47:37 STP: set port 2 to learning
Jul 10 15:47:37 STP: set port 2 to forwarding
Jul 10 15:48:37 Port: link state changed to 'up' (100M-F) on port 11
Jul 10 15:48:37 STP: set port 11 to discarding
Jul 10 15:48:39 STP: set port 11 to learning
Jul 10 15:48:39 STP: set port 11 to forwarding
Jul 10 15:48:39 Port: link state changed to 'up' (100M-F) on port 8
Jul 10 15:48:39 STP: set port 8 to discarding
Jul 10 15:48:41 Port: link state changed to 'up' (100M-F) on port 12
Jul 10 15:48:41 STP: set port 12 to discarding
Jul 10 15:48:41 Port: link state changed to 'up' (100M-F) on port 6
Jul 10 15:48:41 STP: set port 6 to discarding
Jul 10 15:48:42 STP: set port 8 to learning
Jul 10 15:48:42 STP: set port 8 to forwarding
Jul 10 15:48:43 STP: set port 6 to learning
Jul 10 15:48:43 STP: set port 6 to forwarding
Jul 10 15:48:43 STP: set port 12 to learning
Jul 10 15:48:43 STP: set port 12 to forwarding
Jul 10 15:49:16 Port: link state changed to 'up' (100M-F) on port 10
Jul 10 15:49:16 STP: set port 10 to discarding
Jul 10 15:49:18 STP: set port 10 to learning
Jul 10 15:49:18 STP: set port 10 to forwarding
Jul 10 15:51:18 Port: link state changed to 'down' on port 19
Jul 10 15:51:18 STP: set port 19 to discarding
It drops all connections and then comes back online, Any ideas?
Wade
Rebooting switch..
- WadeMcKewon
- Member
- Posts: 6
- Joined: Mon Apr 24, 2017 3:43 pm
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Rebooting switch..
My crystal ball is no better than yours. :)
I would check the obvious such as insufficient power, is it plugged into a UPS and if so what model is it?
Could be ground current if tower grounds are not bonded properly to electrical service grounds?
Beyond that you could swap out with a spare and see if problem stays then you know it is environmentally and if not then RMA it.
I would also upgrade the firmware, not that I think that is the issue but it is out of date.
I would check the obvious such as insufficient power, is it plugged into a UPS and if so what model is it?
Could be ground current if tower grounds are not bonded properly to electrical service grounds?
Beyond that you could swap out with a spare and see if problem stays then you know it is environmentally and if not then RMA it.
I would also upgrade the firmware, not that I think that is the issue but it is out of date.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 47 guests