We are having some issues using a new Netonix switch. We have not used these before so we are probably not configuring it correctly.
We have a wireless radio network starting with a juniper router, to a point to point radio link to the Netonix switch routing to other radios.
I can access everything up until the switch through the network, but the switch is not accessible or responding to pings.
We have a direct connection to the switch to make any configuration changes, I am fairly certain the issue is in the vlan set up for this switch.
We need it set up to accept vlans 13,16,17,18,244,3000 on various ports
We have our network coming into port 13, which has all of those vlans enabled (both in the check box menu as a list, and having the "T" bold) and each port is set up the same way with it's specific vlans.
Are we missing anything in the configuration?
I have screen shots of the config in question if I did not articulate it clearly.
Here is the configuration:
Any help would be greatly appreciated!
Thank you!
