Hi Eric,
Have you replicated MSTP priority and cost by instance problem or ERPS that block access to management VLAN ? Any fix in work ?
v1.4.8rcX Bug reports and comments
-
Eric Stern - Employee
- Posts: 532
- Joined: Wed Apr 09, 2014 9:41 pm
- Location: Toronto, Ontario
- Has thanked: 0 time
- Been thanked: 130 times
Re: v1.4.8rcX Bug reports and comments
They are on my todo list, but I'd still need steps to reproduce each of them.
Re: v1.4.8rcX Bug reports and comments
I have upgraded most (not all) of my switches to 1.4.8rc7.
Most, no issues, but starting just after the upgrade, one of my more heavily trafficed AP switches (6 ubiquiti APs) now spontaneously reboots every 8 to 24 hours.
I am quoting a recent log (from 24 minutes ago).
Prior to the upgrade, this switch had hundreds of days of uptime.
Most, no issues, but starting just after the upgrade, one of my more heavily trafficed AP switches (6 ubiquiti APs) now spontaneously reboots every 8 to 24 hours.
I am quoting a recent log (from 24 minutes ago).
Prior to the upgrade, this switch had hundreds of days of uptime.
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: v1.4.8rcX Bug reports and comments
I have not idea with the information provided.
Maybe tell us the model of switches that you are seeing issues with along with their MAC address.
And explain in more detail what is going on.
Is the switch itself rebooting or the APs?
Maybe tell us the model of switches that you are seeing issues with along with their MAC address.
And explain in more detail what is going on.
Is the switch itself rebooting or the APs?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: v1.4.8rcX Bug reports and comments
sirhc wrote:I have not idea with the information provided.
Maybe tell us the model of switches that you are seeing issues with along with their MAC address.
And explain in more detail what is going on.
Is the switch itself rebooting or the APs?
The switch is rebooting.
All the devices connected to it are power cycled as well. The log shows 'cold boot detected'.
Model is : WS12-250-AC
mac address: EC:13:B2:61:12:52
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: v1.4.8rcX Bug reports and comments
jportman wrote:sirhc wrote:I have not idea with the information provided.
Maybe tell us the model of switches that you are seeing issues with along with their MAC address.
And explain in more detail what is going on.
Is the switch itself rebooting or the APs?
The switch is rebooting.
All the devices connected to it are power cycled as well. The log shows 'cold boot detected'.
Model is : WS12-250-AC
mac address: EC:13:B2:61:12:52
Is this the only unit doing this?
I will have Julian check if this unit MAC is one that may have a defective power supply C51 CAP. If it is I would take out of service and RMA as it can end up locked up. Why it started after the firmware upgrade I have no idea as that should not cause this to happen.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Re: v1.4.8rcX Bug reports and comments
After downgrading to 1.4.7 it has been up 19 hours so far. Will report if it reboots again.
- Julian
Re: v1.4.8rcX Bug reports and comments
it's not in the date range for the cap problem, plus the load on it is heavy enough that it shouldn't be presenting that issue, regardless.
Can you get me a diagram of what's connected where, and a configuration? I'll try and get this duplicated in our lab.
Can you get me a diagram of what's connected where, and a configuration? I'll try and get this duplicated in our lab.
Re: v1.4.8rcX Bug reports and comments
Unit has been stable since the downgrade to 1.4.7.
The screenshot shows the basic attachments.
https://www.dropbox.com/s/l9f4s0xjyyjss ... 4.png?dl=0
Ports 1-6 are ubnt prism aps and the other two active ports are low volume devices.
Port 12 is uplink to the router.
No special vlans, no rstp, etc. Pretty vanilla config.
JP
The screenshot shows the basic attachments.
https://www.dropbox.com/s/l9f4s0xjyyjss ... 4.png?dl=0
Ports 1-6 are ubnt prism aps and the other two active ports are low volume devices.
Port 12 is uplink to the router.
No special vlans, no rstp, etc. Pretty vanilla config.
JP
- mrmarria
- Member
- Posts: 31
- Joined: Tue Oct 25, 2016 3:59 pm
- Has thanked: 5 times
- Been thanked: 2 times
Re: v1.4.8rcX Bug reports and comments
WS-8-150-DC with 1.4.7 - I was having trouble on reboot SFP disappearing. wispswitch-1.4.8rc7 seems to have made that stop, though I saw nothing in the release notes that would indicate that was targeted...... thanks?
Who is online
Users browsing this forum: No registered users and 23 guests