Current VLAN config. Pretty basic stuff.
- Code: Select all
"VLANs": [
{
"ID": 1,
"Name": "Management",
"Enable": true,
"PortSettings": "UUUUUUUUUUUUEU",
"IPv4_Enable": false,
"IPv4_Address": "",
"IPv4_Netmask": "",
"IPv6_Enable": false,
"IPv6_Address": "",
"IGMP_Querier": false
},
{
"PortSettings": "EEEEEEEEEEETTE",
"Enable": true,
"Name": "Backhaul",
"ID": "301",
"IPv4_Enable": true,
"IPv4_Address": "172.23.250.5",
"IPv4_Netmask": "255.255.255.0",
"IPv6_Enable": false,
"IPv6_Address": "",
"IGMP_Querier": true
}
],
So, I went into the GUI (too chicken to try a config from the CLI yet) and removed 301, set Management to 301, with ports 1-12 untagged, 13 tagged. The switch didn't seem to like that:
- Code: Select all
Sep 28 08:27:20 UI: Configuration changed by admin (xx.yyy.zzz.nn)
Sep 28 08:27:20 UI: VLAN 1 ID: changed from '1' to '301'
Sep 28 08:27:20 UI: VLAN 1 PortSettings: changed from 'UUUUUUUUUUUUEU' to 'UUUUUUUUUUUUTU'
Sep 28 08:27:20 UI: VLANs: removed 'Backhaul'
Sep 28 08:27:24 admin: removing lan (eth0.301) from firewall zone lan
Sep 28 08:27:28 admin: adding lan (eth0.301) to firewall zone lan
Sep 28 08:27:32 admin: adding lan (eth0.301) to firewall zone lan
Sep 28 08:27:33 STP: set port 1 to discarding
Sep 28 08:27:33 STP: set port 2 to discarding
Sep 28 08:27:33 STP: set port 4 to discarding
Sep 28 08:27:33 STP: set port 5 to discarding
Sep 28 08:27:33 STP: set port 6 to discarding
Sep 28 08:27:34 STP: set port 11 to discarding
Sep 28 08:27:34 STP: set port 12 to discarding
Sep 28 08:27:34 STP: set port 13 to discarding
Sep 28 08:27:34 STP: MSTI0: New root on port 2, root path cost is 200000
Sep 28 08:27:34 STP: set port 2 to learning
Sep 28 08:27:34 STP: set port 2 to forwarding
Sep 28 08:27:34 STP: set port 12 to learning
Sep 28 08:27:35 STP: set port 12 to forwarding
Sep 28 08:27:35 STP: set port 12 to discarding
Sep 28 08:27:35 STP: set port 5 to learning
Sep 28 08:27:35 STP: set port 5 to forwarding
Sep 28 08:27:35 Port: link state changed to 'down' on port 13
Sep 28 08:27:35 STP: set port 12 to learning
Sep 28 08:27:35 STP: set port 12 to forwarding
Sep 28 08:27:36 Port: link state changed to 'up' (1G) on port 13
Sep 28 08:27:36 STP: set port 13 to discarding
Sep 28 08:27:36 STP: set port 11 to learning
Sep 28 08:27:36 STP: set port 11 to forwarding
Sep 28 08:27:36 STP: set port 6 to learning
Sep 28 08:27:37 STP: set port 6 to forwarding
Sep 28 08:27:37 STP: set port 4 to learning
Sep 28 08:27:37 STP: set port 4 to forwarding
Sep 28 08:27:37 STP: set port 1 to learning
Sep 28 08:27:37 STP: set port 1 to forwarding
Sep 28 08:27:39 STP: set port 13 to learning
Sep 28 08:27:39 STP: set port 13 to forwarding
Sep 28 08:32:30 admin: Reverting to last known good configuration
Any suggestions on how to change the management vlan? I have no choice but to pass 301 tagged on port 13.
Thanks!