sirhc wrote:Tell me any device that keeps a log after reboot?
This is why we support a syslog server.
viewtopic.php?f=17&t=1497&p=11096&hilit=+log+reboot+syslog#p11096
Every router I have? All my unix servers? Or more accurately, everything that's not "WISP" gear. :)
Syslog server does no good if the switch isn't passing traffic or if you're troubleshooting anything that involves losing connectivity.
sirhc wrote:I highly doubt the switch "locked" up but rather this is a Pause Frame Packet Lock. There are TONS of posts discussing this on this forums and UBNT Forum. This is not a bug on our end but rather how wireless devices handle Pause Frames.
viewtopic.php?f=17&t=671&start=110#p22252
Search and read post on the forum about Flow Control. You can try disabling Flow Control on all ports if the problem persists to determine if that is your issue.
I'll try it, but I don't know why out of 5 switches, all with UBNT radios with the same firmware I'd only see it on this switch. Also, perhaps the default should be "off" and let the adventurous enable it. Edit: also of note, when this was locked up last night, I repeatedly bounced the interface of the radio that feeds the site to no effect. I also disabled flow control on the radio, tried different link speeds, all to no effect. I've not yet read the 12 pages of that thread, but I don't imagine pause frames on one port should affect the whole switch, right?
