firewall settings
- chrisg
- Member
- Posts: 1
- Joined: Wed Aug 31, 2016 9:11 am
- Has thanked: 0 time
- Been thanked: 0 time
firewall settings
I am looking for some firewall settings for the Netonix switch for a Mikrotik board. Need to allow the Netonix switch which is set at 192.168.1.22 and setting it as a NAT rule on Mikrotik as dstnat, protocol 6 (tcp), dst port 8081
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: firewall settings
OK so there is nothing that needs setup on the Netonix switch.
If the Switch is on an invalid IP inside a NAT on the MT then you need to setup port mapping on the MT to point to the switch. This really is not a firewall setup but rather a port mapping on the MT to point an outside port # to an inside IP port number.
Now you can further setup a firewall rule on the MT so that only you can use the port mapping on the MT NAT which I suggest.
If the Switch is on an invalid IP inside a NAT on the MT then you need to setup port mapping on the MT to point to the switch. This really is not a firewall setup but rather a port mapping on the MT to point an outside port # to an inside IP port number.
Now you can further setup a firewall rule on the MT so that only you can use the port mapping on the MT NAT which I suggest.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
2 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 56 guests