v1.4.9 Bug reports and Comments

[HughesHall]

Just like to flag that in 1.4.9
CDP and LLDP still are not supplying any remote port data.
CDP is missing 'cdpCacheDevicePort'
LLDP is missing 'lldpRemPortId', 'lldpRemPortIdSubtype', and 'lldpRemPortDesc'
We use this information to draw links between ports on two devices.
Any idea when this can be fixed?

[Eric Stern]

I'm not sure if this has been posted yet, but snmpwalk will not complete proper walk of OIDs with v1.4.9, worked just fine in 1.4.8 and previous
example:

v1.4.9 ws-6-mini:
root@voyager:~# snmpwalk -On -v2c -c public 10.76.5.9 .1
.1.3.6.1.2.1.1.1.0 = STRING: Netonix WS-6-MINI
<SNIP>
.1.3.6.1.2.1.17.7.1.4.2.1.2.0.150 = Gauge32: 150
.1.3.6.1.2.1.17.7.1.4.2.1.2.0.149 = Gauge32: 149
Error: OID not increasing: .1.3.6.1.2.1.17.7.1.4.2.1.2.0.150
>= .1.3.6.1.2.1.17.7.1.4.2.1.2.0.149

v1.4.8 ws-6-mini:
root@voyager:~# snmpwalk -On -v2c -c public 10.76.4.9 .1
.1.3.6.1.2.1.1.1.0 = STRING: Netonix WS-6-MINI
<SNIP>
.1.3.6.1.6.3.16.1.5.2.1.5.3.97.108.108.1.1 = INTEGER: permanent(4)
.1.3.6.1.6.3.16.1.5.2.1.6.3.97.108.108.1.1 = INTEGER: active(1)
.1.3.111.2.802.1.1.6.1.7 = No more variables left in this MIB View (It is past the end of the MIB tree)

Those OIDs are reporting VLAN information. The VLAN ID becomes part of the OID (thats the .150 and .149 on the items shown above), if your VLANs are not arranged numerically on your VLAN tab then this happens.

I'll fix this in 1.5.0. In the meantime if you re-arrange your VLANs so they are ordered numerically it should fix this.

[Eric Stern]

Just like to flag that in 1.4.9
CDP and LLDP still are not supplying any remote port data.
CDP is missing 'cdpCacheDevicePort'
LLDP is missing 'lldpRemPortId', 'lldpRemPortIdSubtype', and 'lldpRemPortDesc'
We use this information to draw links between ports on two devices.
Any idea when this can be fixed?

This will be fixed in 1.5.0.

[sporkman]

I await the snarky reply about the "obvious" new place this lives, but tried 1.4.9 on a switch that's replacing the "locks up all the time" mini, and I just can't find where to reset the password. This page in general looks a bit slim. What obvious thing am I missing here?

[sakita]

WS-8-250-DC Board Rev D:

With 1.4.8 the wattages can be displayed for each port individually.

With 1.4.9 only the total wattage is displayed.

[lligetfa]

I await the snarky reply about the "obvious" new place this lives, but tried 1.4.9 on a switch that's replacing the "locks up all the time" mini, and I just can't find where to reset the password. This page in general looks a bit slim. What obvious thing am I missing here?

Where it lives is below Syslog on the same row as Storm control but on your screenshot there is only white space there. Maybe try a different browser.

[sporkman]

Ah, wow, so now I have to use Firefox. I was reading elsewhere that Chrome was preferred (and that's my default and has been). There's a javascript error here if anyone's interested. No js errors in Firefox (but it does complain about line 6 of the html where page encoding is overridden).

[sporkman]

And... going back to 1.4.8 resolves it, so there we are. Different errors, all about id's not being unique (tip: css id = unique as you are probably targeting a specific element for some scripting hook, css class, use all over the place, it's for styling ). Also just note I am running ublock-origin, but it is disabled.

[rbbjolson]

I have a WS-10-250-AC. Just upgraded to 1.4.9. When I create a LAG group (of any type) on the SFP ports, the group does not appear on the VLAN configuration page as it seemingly should.

Here's a screenshot of the LAG configuration page:

So, based on my search of the forum, when I have a LAG, it should appear on the VLAN page for configuration, right? If so, it's not working as expected:

Please advise.

[sirhc]

No, why would it?

Maybe review my post here: viewtopic.php?f=30&t=452#p2961

I have a Static LAG at all my towers and you can see my VLAN TAB in the above post, LACP or Static LAG would be treated the same on the VLAN TAB.