sirhc wrote:Can you posts a picture of the POP UP menu where you configure the Trunk Port / Allowed VLANs.
Here it is:
Discovery TAB Issue
- HughesHall
- Member
- Posts: 8
- Joined: Thu Feb 15, 2018 6:01 am
- Has thanked: 0 time
- Been thanked: 0 time
Re: Discovery TAB Issue
Here it is:
- Attachments
-
- HughesHall
- Member
- Posts: 8
- Joined: Thu Feb 15, 2018 6:01 am
- Has thanked: 0 time
- Been thanked: 0 time
Re: Discovery TAB Issue
We have issue with discovery tab on all switches. It does not show any results even LLDP, CDP, and Ubiquiti is enabled.
Many switches has connected Ubiquiti devices with Ubiquiti and CDP discovery enabled, Mikrotik devices, and other Netonix switches.
Many switches has connected Ubiquiti devices with Ubiquiti and CDP discovery enabled, Mikrotik devices, and other Netonix switches.
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Discovery TAB Issue
bipbaep wrote:We have issue with discovery tab on all switches. It does not show any results even LLDP, CDP, and Ubiquiti is enabled.
Many switches has connected Ubiquiti devices with Ubiquiti and CDP discovery enabled, Mikrotik devices, and other Netonix switches.
What version of firmware are you running on your switch?
UBNT had changed UBNT protocol and we had to update out firmware awhile back.
Always good to specify firmware version, but with that said and a quick check it appears it may be broken again. Stephen and Eric will need to look at this.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
Stephen - Employee
- Posts: 1033
- Joined: Sun Dec 24, 2017 8:56 pm
- Has thanked: 85 times
- Been thanked: 181 times
Re: Discovery TAB Issue
I just ran a test locally on the discovery tab for LLDP, CDP, and UBNT packets. It is working for me.
The version of the firmware is very important, we just went through a lot of changes for Discovery on 1.5.2 and now we are at 1.5.3.
When possible, please post the config tab and the discovery tab so we can look at this in more detail.
The version of the firmware is very important, we just went through a lot of changes for Discovery on 1.5.2 and now we are at 1.5.3.
When possible, please post the config tab and the discovery tab so we can look at this in more detail.
Who is online
Users browsing this forum: No registered users and 65 guests