8-port AC switch - WS-8-250-AC; Firmware 1.4.9
We've been using strict limits on two ports on one of our switches, and I wanted to add additional qos rules based on vlanID. After I added qos rules for both ports, the strict limit values seemed to be either ignored or interpreted differently now. Oddly, after removing the qos rules, the port limit values still don't behave like they did before.
Specifically, port 4 had a value of 130M, which worked as expected previously. Afterward, the same 130M value restricts throughput through that port to 2-3M. I had to increase the value to 1300M to allow more throughput on that port.
Am I missing something, or is this possibly a bug?
Regards,
Mike Kimmick
QoS/Limit Problem
-
sirhc - Employee
- Posts: 7421
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1609 times
- Been thanked: 1326 times
Re: QoS/Limit Problem
Upgrade your firmware which is about a year old or so.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 38 guests