Here's something odd after upgrading to 1.5.0 on one of our switches. Everything is working fine, but the power being used as reported by each port is being miscalculated somehow. This is one of our older Netonix products, and some ports are down due to water infiltration. The board is Revision E, which matches a lot of our WS-8-250AC's.
All of the devices showing ~40W are Ubiquiti Rocket units. Also one AF5X that is on 24V on Port 1. Port 2 is another AF5X on 24V High. But it's only using 1.1W according to this screenshot, yet everything else is in the 40W range. Something seems way off here.
Ideas?
Doug N
WS-10-250AC power mis-reporting?
- dougncbp
- Member
- Posts: 26
- Joined: Thu Mar 10, 2016 11:22 am
- Has thanked: 0 time
- Been thanked: 0 time
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-10-250AC power mis-reporting?
This is probably not a miscalculation?
I am guessing current sensor damage but could be wrong, maybe something is messed up, try a reboot.
If no love from reboot open it up and inspect the current sensors, usually current sensor damage is very obvious.
I am guessing current sensor damage but could be wrong, maybe something is messed up, try a reboot.
If no love from reboot open it up and inspect the current sensors, usually current sensor damage is very obvious.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- dougncbp
- Member
- Posts: 26
- Joined: Thu Mar 10, 2016 11:22 am
- Has thanked: 0 time
- Been thanked: 0 time
Re: WS-10-250AC power mis-reporting?
Could be damage indeed. That location had a terrible storm a couple of weeks ago, and we lost one of the AF5X units. Are the current sensors a typical tombstone transformer, or something else? Will try a reboot though and report back.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 87 guests