I recently purchased the WS-12-250-AC, the minute I plug multiple PoE devices on it the screen changes with Error under the Watts column. The status screen shows errors as well plus the fan is always running regardless that this switch is in a temperature control room. I have reset the switch multiple times and uploaded the firmware with the v1.5.0 release. Should this be sent for RMA? Please advise…
Thank you!
Greg
Watts column display errors on status screen
- GregColon
- Member
- Posts: 1
- Joined: Mon Jun 18, 2018 10:27 am
- Has thanked: 0 time
- Been thanked: 0 time
Watts column display errors on status screen
- Attachments
-
- Status Screen
-
- Status System Screen
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: Watts column display errors on status screen
Could be a failure or damage.
If it is damage most likely from ground current from poor grounding.
viewtopic.php?f=17&t=4104&p=25584&hilit=+damage+current+sensor+ground#p25584
viewtopic.php?f=6&t=3703&p=23848&hilit=+damage+current+sensor+ground#p23848
viewtopic.php?f=17&t=3416&p=24540&hilit=+damage+current+sensor+ground#p24540
Either way you will need to RMA it.
If it is damage most likely from ground current from poor grounding.
viewtopic.php?f=17&t=4104&p=25584&hilit=+damage+current+sensor+ground#p25584
viewtopic.php?f=6&t=3703&p=23848&hilit=+damage+current+sensor+ground#p23848
viewtopic.php?f=17&t=3416&p=24540&hilit=+damage+current+sensor+ground#p24540
Either way you will need to RMA it.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
- jagman2020
- Member
- Posts: 17
- Joined: Wed Nov 01, 2017 5:28 pm
- Has thanked: 2 times
- Been thanked: 3 times
Re: Watts column display errors on status screen
OK.. Will RMA when I get the chance to swap it out..
It is earthed correctly to all areas.. but i will check that when we put the replacement in.
It is earthed correctly to all areas.. but i will check that when we put the replacement in.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 43 guests