WS-12-250-DC max cpu
-
mrprimo - Member
- Posts: 42
- Joined: Sun Aug 30, 2015 4:26 am
- Location: Taranaki, New Zealand
- Has thanked: 7 times
- Been thanked: 6 times
WS-12-250-DC max cpu
Hi There, I have a WS-12-250-DC sitting at full load cpu wise, its only doing 150mbit, what would cause such high load?
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-12-250-DC max cpu
CPU has nothing to do with switch capacity.
CPU is there to run the UI/CLI and Daemons, the switch core is a separate thing.
Might help to know model of switch and firmware version.
Also your configuration, easiest thing to do is post up screen grabs of any Tabs with configuration changes and the Device Configuration.
CPU is there to run the UI/CLI and Daemons, the switch core is a separate thing.
Might help to know model of switch and firmware version.
Also your configuration, easiest thing to do is post up screen grabs of any Tabs with configuration changes and the Device Configuration.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
mrprimo - Member
- Posts: 42
- Joined: Sun Aug 30, 2015 4:26 am
- Location: Taranaki, New Zealand
- Has thanked: 7 times
- Been thanked: 6 times
Re: WS-12-250-DC max cpu
Only thing I enabled in the configuration was snmp, and ive disabled this and CPU is still max.
-
Dave - Employee
- Posts: 726
- Joined: Tue Apr 08, 2014 6:28 pm
- Has thanked: 1 time
- Been thanked: 158 times
Re: WS-12-250-DC max cpu
Can you please try v1.4.0rc12 - BETA / Release Candidate
.
If this doesn't fix the CPU utilization, we might have to remote into your machine to see why your CPU usage is so high because that is not normal.
.
If this doesn't fix the CPU utilization, we might have to remote into your machine to see why your CPU usage is so high because that is not normal.
-
taormoi - Member
- Posts: 9
- Joined: Tue Nov 03, 2015 4:56 pm
- Location: Casper, WY
- Has thanked: 1 time
- Been thanked: 0 time
Re: WS-12-250-DC max cpu
Seeing the same thing today on 1.5.1rc11. Should I try rebooting the switch? Been damn cold here, -15 last night, above 0 now.
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-12-250-DC max cpu
taormoi wrote:Seeing the same thing today on 1.5.1rc11. Should I try rebooting the switch? Been damn cold here, -15 last night, above 0 now.
I would reboot it then upgrade to v1.5.1
Sometimes there is a "rare" issue when the service SWITCH loads multiple times. I recently saw this on 3 of my WISP's Netonix switches, a reboot resolved it.
Stephen is working on this as it should never happen.
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
-
taormoi - Member
- Posts: 9
- Joined: Tue Nov 03, 2015 4:56 pm
- Location: Casper, WY
- Has thanked: 1 time
- Been thanked: 0 time
Re: WS-12-250-DC max cpu
I rebooted it which cleared the max cpu and then rolled it back to 1.5.0 - last night it disappeared for a couple hours then came back up late in the evening. It's passing data but we can ping the switch but not login to it. Its powered by a couple of 12v solar panels. Short of driving out to reset it, is there anything we can try first remotely?
We ssh'd in and ran the reload cold command. Still cannot access the web gui.
We ssh'd in and ran the reload cold command. Still cannot access the web gui.
-
taormoi - Member
- Posts: 9
- Joined: Tue Nov 03, 2015 4:56 pm
- Location: Casper, WY
- Has thanked: 1 time
- Been thanked: 0 time
Re: WS-12-250-DC max cpu
Update, went out and power cycled it, still cannot access the web gui remotely.
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: WS-12-250-DC max cpu
taormoi wrote:Update, went out and power cycled it, still cannot access the web gui remotely.
OK but when your on site plugged into the unit you can access the web UI?
If you can access the web gui on site plugged into it then this would tend to indicate a network configuration issue?
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Who is online
Users browsing this forum: No registered users and 55 guests