v1.5.2rcX Bug reports and comments

[Eric Stern]

Please post bug reports and comments on v1.5.2rcX ONLY in this thread.

FIXED/CHANGED
- Fixed IGMP snooping - RC1
- Fixed IGMP snooping with multiple VLANs - RC2
- Fixed disabling IGMP querier - RC2
- Fixed IGMP handling tagged frames - RC3
- Fixed STP/LAG issue, this fix prevents switches from being locked out when access is through a lag - RC4
- Fixed STP/LAG issue, significant performance improvement when making configuration changes - RC4
- Updated Copyright - RC4


ENHANCEMENTS
- Added IGMP Snooping monitoring in the web UI (Device -> IGMP Snooping). Aready in CLI ("show igmp") - RC1
- Port Selection De-selection now functions with the ports graphic at top of switch web UI - RC3
- Legacy/New fan test is now asynchronous, reboots/upgrades are now much faster - RC4
- Added button to fan status to allow user to initiate an asynchronous fan test - RC4
- Discovery tab now allows for individual to select which protocol is being searched for instead of all simultaneously - RC4


KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help - please private message Eric Stern to help
- Discovery tab can experience performance issue's on a large layer 2 segment, a re-work on this sub-system is in progress

RC4 - Released 3/1/2019
RC3 - Released 2/8/2019
RC2 - Released 2/7/2019
RC1 - Released 2/6/2019

[Stephen]

FIXED/CHANGED
- Fixed IGMP snooping - RC1
- Fixed IGMP snooping with multiple VLANs - RC2
- Fixed disabling IGMP querier - RC2
- Fixed IGMP handling tagged frames - RC3

ENHANCEMENTS
- Added IGMP Snooping monitoring in the web UI (Device -> IGMP Snooping). This information was already available in the CLI ("show igmp") - RC1
- Port Selection De-selection now functions with the ports graphic at top of switch web UI - RC3

KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help - please private message Eric Stern to help
- Discovery tab can experience performance issue's on a large layer 2 segment, a re-work on this sub-system is in progress

RC3 - Released 2/8/2019
RC2 - Released 2/7/2019
RC1 - Released 2/6/2019

Click HERE to go download here

[mayheart]

This is more of an annoyance than anything, it started with a few firmwares ago.

When 1.5.1 & 1.5.2 boots up it thinks the date is 2019-12-31, this isn't that big of a problem unless you're using remote syslog. It did the same with 1.5.0 and earlier versions thinking its 2018-12-31.

Is it possible to get it changed to the beginning of the year instead? otherwise I have Netonixes filling up greylog/librenms with future data, makes it hard to see currently what's happening.

Thanks.

[Stephen]

mayheart,

Added this to the list. Thanks for letting us know.

[Stephen]

FIXED/CHANGED
- Fixed IGMP snooping - RC1
- Fixed IGMP snooping with multiple VLANs - RC2
- Fixed disabling IGMP querier - RC2
- Fixed IGMP handling tagged frames - RC3
- Fixed STP/LAG issue, this fix prevents switches from being locked out when access is through a lag - RC4
- Fixed STP/LAG issue, significant performance improvement when making configuration changes - RC4
- Updated Copyright - RC4


ENHANCEMENTS
- Added IGMP Snooping monitoring in the web UI (Device -> IGMP Snooping). Aready in CLI ("show igmp") - RC1
- Port Selection De-selection now functions with the ports graphic at top of switch web UI - RC3
- Legacy/New fan test is now asynchronous, reboots/upgrades are now much faster - RC4
- Added button to fan status to allow user to initiate an asynchronous fan test - RC4
- Discovery tab now allows for individual to select which protocol is being searched for instead of all simultaneously - RC4


KNOWN ISSUES
- WEB UI issues when not at 100% Zoom on browser especially on VLAN TAB
- Some language templates need help - please private message Eric Stern to help
- Discovery tab can experience performance issue's on a large layer 2 segment, a re-work on this sub-system is in progress

RC4 - Released 3/1/2019
RC3 - Released 2/8/2019
RC2 - Released 2/7/2019
RC1 - Released 2/6/2019

Click HEREto go to download.

[rwineteer]

Upgraded a WS-12-250-DC to 1.5.2rc4 and can no longer snmpwalk it.

[Stephen]

I've just double checked snmp on a couple switches including the WS-12-250-DC and it's still working for me. Can you give me more details about your configuration and the tool you are using to perform the snmp walk?

[rwineteer]

Unit was upgraded from 1.5.0rc3 (snmp working) to 1.5.2rc4. After the upgrade, with snmp now not working, I rebooted the WS-12-250-DC again. The device was then able to be polled again.

[Stephen]

Glad you've been able to resolve it.
For future reference it would be helpful to post up the logs while the issue is still presenting itself.
It would help us find ways to prevent these types of things in the future.

[IntL-Daniel]

There is long time ongoing issue with Discovery tab page - the refresh buton kick me back to the main page (latest Firefox 65.0.2 64bit). If I test the same in Chrome, looks like works as expected.