I'm pretty sure in the past I used OID 1.3.6.1.4.1.46242.7 to chart the total input current being drawn on a WS-12-250-DC, but for some reason I'm no longer getting a response when using that OID.
Firmware is 1.5.1
Input voltage is working fine though.
Thanks,
Leo
DC input current OID
- lboyd
- Member
- Posts: 2
- Joined: Wed Sep 06, 2017 1:00 pm
- Has thanked: 0 time
- Been thanked: 0 time
-
sakita - Experienced Member
- Posts: 206
- Joined: Mon Aug 17, 2015 2:44 pm
- Location: Arizona, USA
- Has thanked: 93 times
- Been thanked: 80 times
Re: DC input current OID
Maybe try most recent version (v1.5.2rc5 as of now)... there is a note on the firmware page "Fixed SNMP (Broken in v1.5.1rc3" ...1.5.1 final *should* work but the latest version is a good thing to try first.
Today is an average day: Worse than yesterday, but better than tomorrow.
-
sirhc - Employee
- Posts: 7416
- Joined: Tue Apr 08, 2014 3:48 pm
- Location: Lancaster, PA
- Has thanked: 1608 times
- Been thanked: 1325 times
Re: DC input current OID
sakita wrote:Maybe try most recent version (v1.5.2rc5 as of now)... there is a note on the firmware page "Fixed SNMP (Broken in v1.5.1rc3" ...1.5.1 final *should* work but the latest version is a good thing to try first.
We took v1.5.1 off the market as it had a serious flaw - please use v1.5.2rc5 or newer
Support is handled on the Forums not in Emails and PMs.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
Before you ask a question use the Search function to see it has been answered before.
To do an Advanced Search click the magnifying glass in the Search Box.
To upload pictures click the Upload attachment link below the BLUE SUBMIT BUTTON.
3 posts
Page 1 of 1
Who is online
Users browsing this forum: No registered users and 77 guests